Samsung RL38SBSW INSTALLING THE FRIDGE/FREEZER, LEVELLING, Clean the fridge/freezer, Place the food in the fridge/freezer, The appliance tilts down to the left

INSTALLING THE FRIDGE/FREEZER

Allow an adequate space and install the fridge/freezer on a firm, level floor.

•If the appliance is not level, there may be unusual noises and poor cooling.

•Wait for at least one hour before plugging the appliance in.

Clean the fridge/freezer.

• Wipe and clean the appliance inside and outside with a damp cloth.

Plug the fridge/freezer into a wall socket used exclusively by this appliance.

• This appliance must be properly grounded.

Place the food in the fridge/freezer.

•It is recommended that you wait for the appliance to cool for 2-3 hours before storing food in it.

LEVELLING

If the front of the appliance is slightly higher than the rear, the door can be closed more easily.

The appliance tilts down to the left.

Turn the left adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level.

The appliance tilts down to the right.

Turn the right adjusting leg in the direction of the arrow with a flat head screwdriver until the appliance is level.

Allow sufficient space to the right, left, back and top for air circulation.

Please ensure that appliance can be moved freely in the event of maintenance & service.

Drawers can be easily opened with this condition.

doors with depth opened

at least 50mm

at least	at least
50mm	50mm

Remove paper on spacer and then attach two spacers (Gray block) on the back side of refrigerator for better performance.

Make sure two spacers fix like below image when you install the refrigerator.

It is improving the refrigerator performance.

Spacer

Spacer

5