REVERSING THE REFRIGERATOR DOOR (CONT’D)
14.Carefully put the Freezer door back on. Assemble the Middle hinge with 2 bolts on the left side.
A screw will be remained after reversing freezer door. And it does not affect performance of the refrigerator.
15.Remove the screw on the bottom right side of the Fridge door.
Switch the Door stopper and the Hinge grommet from the right to the left.
Door stopper
Hinge grommet
16.Remove the Wire cover on the top of the Fridge door with flat head driver and then take out the Top hinge and wires from right side of Fridge door.
17.Detach the Top right hinge cover from the Top hinge and pull the wires out from the Top right hinge cover.
16_ setting up
18.Use 11 mm wrench to separate the Top hinge shaft. Flip the Top hinge and reattach the Top hinge shaft.
19.Switch the side of the Door cap and the Hinge grommet on the top of the Fridge door.
Door cap | Hinge grommet |
20.Reassemble the Top hinge by reversing the step
19.(Make sure to use the Top left hinge cover which can be found underneath the Top table.) Put the assembled hinge on the left side of the fridge door.
Make sure that red tape on the wire is positioned on the end of the Top left hinge cover.
2014. 8. 14. 1:26 |