Samsung RT60KZRSL RT55KZRSL1/XSG, RT60KSRSW1/ZAM, RT60KZRSL1/XSG, RT60KZRSL1/ZAM Operating your refrigerator, LEVELLING THE REFRIGERATOR, 1Freezer, USING THE CONTROL PANEL (ELECTRONIC CONNTROL TYPE), < Case1, < Case2, Setting up _7

	700 mm
mm	at least	at least
	50mm	50mm
698
		mm
		1.364

1.086 mm

• Height of the product may be different depending on the models.

• Allow clearance to the right, left, back and top when installing.

This will help reduce power consumption and keep your energy bills lower.

• Do not install the Refrigerator where the temperature will go below 50ºF (10ºC).

LEVELLING THE REFRIGERATOR

If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily.

Case 1) The appliance tilts down to the left.

•Turn the left adjusting leg in the direction of the arrow until the appliance is level.

Case 2) The appliance tilts down to the right.

•Turn the right adjusting leg in the direction of the arrow until the appliance is level.

< Case1 >

< Case2 >

UPOPERATINGSETTING 012

Operating your refrigerator

USING THE CONTROL PANEL (ELECTRONIC CONNTROL TYPE)

1

2

3

4

•Each time you press the button, a short beep will sound.

•When not in use the temperature display will turn off, this is normal.

1Freezer

Press the Freezer button to set the freezer to desired temperature from the range between -14°C and -23 °C. Default set temperature is set on -20°C and each time you press the Freezer button, temperature will change in following order and temperature indicator will display the desired temperature.

-19 -20 -21 -22 -23 -18 -17 -16 -15 -14

Fridge or Freezer temp indicator will blink when temperature in the fridge or freezer

compartment goes up dramatically by storing warm food or frequent door opening.

(Fridge or Freezer temperature indicator will stop blinking when temperature in the fridge or freezer becomes normal. If temperature indicator does not stop blinking after several hours, please contact your service center.

Setting up _7