User Guide
Connecting Auto Iris Lens Connector
Prepare the following Auto Iris Lens Connector supplied with the camera.
Rib
Pin3
Pin1
Pin4
Pin2
Connect the cable of the control cable, whose covering is stripped, to the Auto Iris Lens Connector as shown below.
Pin Number | DC Control Type | Video Control Type |
1 | Power Source (+9V) | |
2 | Damp(+) | Not used |
3 | Drive(+) | Video Signal |
4 | GND |
User Guide
Mounting the Lens
Loosen a screw fixing the Flange Back Adjustment Ring by turning it counterclockwise and turn the Adjustment Ring to the "C" direction
(counterclockwise) until it stops. Failure to do so E may result in a damage caused by the bump of the
lens against the image sensor part in the camera when mounting the lens.
C Direction
VIDEO |
|
DC | LENS |
|
Auto Iris
Control Cable
5 | 6 |