User Guide
Setting Lens Selection Switch
When lens mounting is completed, set the Lens selection Switch on the rear of the camera according to the mounted lens type.
When the mounted lens is an Auto Iris Lens of the DC control type, set the Lens Selection Switch to "DC". When the mounted lens is an Auto Iris Lens of the Video control type, set the Lens Selection Switch to "VIDEO".
User Guide
Adjusting Back Focus
Although the Back Focus of the camera has been adjusted in the factory before its shipment, the focus may not be accurate for a certain type of the lens.
In this case, follow the procedures below to adjust E the Back Focus. First, following is how to adjust
the Back Focus of the Fixed Focus Lens.
➀Lightly loosen the screw fixing the Back Focus
Adjustment Ring using a screwdriver. | G |
|
②Image a vivid subject (with check patterns) at a distance of more than 10m away and turn the Focus Ring to the infinity (
➂Adjust the Back Focus Adjustment Ring to obtain the clearest image of the subject.
➃Fasten the screw fixing the Back Focus Adjustment Ring.
VIDEO
LENS
DC
7 | 8 |