For this function, you can specify the level for each conversion between Day and Night.
Note
When the DAY/NIGHT is set to AUTO, the AGC is displayed with
EXT
This automatically converts the colour mode to BW mode and vice versa by interfacing with an external sensor.
CAMERA ID | OFF |
IRIS | ALC... |
SHUTTER | OFF |
AGC | HIGH |
MOTION DET | OFF |
DAY/NIGHT | EXT |
WHITE BAL | ATW2 |
PRIVACY | OFF |
SPECIAL | ... |
... | |
EXIT | QUIT |
❚WHITE BAL
The WHITE BAL menu is used to configure the white balance related settings for this camera.
CAMERA ID | OFF |
IRIS | ALC... |
SHUTTER | OFF |
AGC | HIGH |
MOTION DET | OFF |
DAY/NIGHT | DAY... |
WHITE BAL | ATW1 |
PRIVACY | OFF |
SPECIAL | ... |
... | |
EXIT | QUIT |
To adjust the white balance, 4 different modes are provided as follows:
ATW1 (Auto Tracing White Balance mode 1): The camera can automatically adjust the colour temperature in real time according to the ambient temperature change. The colour temperature
variation range is approximately from 2500°K to 9300°K. | 29 |
ENG