How to use OSD Menu
In USER mode, you can break down the level in 16 steps from VERY LOW to VERY HIGH to your preference.
AGC FIX
LEVEL[01]
If you monitor a fast moving object in a low contrast scene, select F.FAST while select S.SLOW for a hardly moving object in the same lighting condition.
Note :
–If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the MOTION menu will be deactivated.
❖ DNR | [OFF,LOW,MID,HIGH, USER(1~16)] |
If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen.
As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.
FIX mode is not available if you set the
BACKLIGHT function to WDR.
Note :
–If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the AGC menu will be deactivated.
–If FLICKERLESS is set to ON, the AGC FIX mode will be disabled.
❖ MOTION | [S.SLOW, SLOW, NORM, FAST, F.FAST] |
The MOTION menu is used to adjust the strength of the AGC level for a control of the camera motion. This is available only if the
You can select one from S.SLOW, SLOW, NORM, FAST and F.FAST for the AGC level.
You can configure the DNR (Digital Noise Reduction) related settings.
Reduces the noise on the screen.
This is especially useful for a severely distorted screen.
You can set the level if you set DNR to USER.
❖
[OFF, AUTO X2, AUTO X4, AUTO X6, AUTO X8, AUTO X12, AUTO X16, AUTO X24, AUTO X32, AUTO X48, AUTO X64, AUTO X96, AUTO X128, AUTO X256, AUTO X512]
❖XDR (eXtended Dynamic Range) [OFF, LOW, MID, HIGH]
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility.
Select one from OFF, LOW, MID and HIGH. Closing to HIGH will increase the compensation level.
ENG
English – 19