Samsung SCC-B5333P How to use OSD Menu, 20 – DIGITAL COLOR DOME CAMERA

How to use OSD Menu

❖ DAY/NIGHT [DAY,NIGHT,AUTO,EXT]

•DAY

If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions.

•NIGHT

If set to NIGHT, it will be fixed to Black-and-White mode regardless of the ambient conditions.

If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON.

If BURST is set to ON, the Burst signal will output together with the black-and-white composite video signal. If BURST is set to OFF, the Burst signal does not output.

You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.

•AUTO

The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.

If you press the SETUP switch with an AUTO- based sub menu selected, you will see the appropriate screen.

￿AUTO￿
BURST		OFF
DAY￿NIGHT
BRIGHTNESS		MID
DWELL TIME		2S
NIGHT￿DAY
BRIGHTNESS		MID
DWELL TIME		5S
MASK AREA		1 2
￿	￿	￿

You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.

The BRIGHTNESS of DAY￿NIGHT sets the brightness degree of color to BW switching, for which you can select from LOW, MID, and HIGH. As you adjust it from HIGH to LOW, the screen switches to black and white mode under the darker situation.

DWELL TIME of DAY￿NIGHT sets the time to maintain switched black and white mode.

The BRIGHTNESS of NIGHT￿DAY sets the brightness degree of BW to color switching, for which you can select from LOW, MID, and HIGH. As you adjust it from HIGH to LOW, the screen switches to color mode under the darker situation.

DWELL TIME of NIGHT￿DAY sets the time to maintain switched color mode.

The MASK AREA menu is used to prevent unintended mode switching or inability of determining the switching due to existence of

20 – DIGITAL COLOR DOME CAMERA