How to use OSD Menu
- How to set the area
| AREA |
|
|
| |
|
|
|
|
|
|
PIXEL LEVEL |
| [4] |
|
| |
|
|
| |||
<SIZE> |
|
|
|
|
|
<LOCATION> |
|
|
|
| |
|
|
|
|
|
|
|
| ||||
①If you press the SETUP switch with the AREA option set to ON, you can specify the position and size of the area.
②If you change the PIXEL LEVEL for setting
the position, specify the pixel that moves by a single pressure of the switch.
③In <SIZE>, press the SETUP switch and use the switch to adjust the size. Press the SETUP switch again to complete the sizing.
④In <LOCATION>, press the SETUP switch and use the switch to specify the position. Press the SETUP switch again to complete the positioning.
Note :
–If you set the LINE of the FENCE to ON, PRIVACY 12 will not be available.
Functions of FENCE, PIP, DIS and DIGITAL ZOOM (if the digital zoom factor is set to larger than 1x) can not be
used simultaneously.
–In the boundary of the defined AREA and LINE, a FENCE detection error may occur if two or more moving objects overlap with each other or one object separates in multiple directions.
•FIXED/MOVED
If an object on the screen suddenly disappears or an object comes out of nowhere and stays for a certain time, the area will be displayed.
A detection (FIXED/MOVED) error may occur if :
- multiple motions occur continuously in random directions
- a fixed object moves in one position continuously - a second object screens the first moving object
❖MASK AREA [1~4]
Specify a detection exception area to mask.
Select a mask number and specify the size and position.
MASK AREA
<SIZE> <LOCATION>
|