|
| Introduction |
| ||
|
|
|
|
| |
No | Name | Brief description |
|
| |
1 | Cover dome | Covers the inner cover, lens, and main body to protect them. |
|
| |
|
|
|
|
| |
2 | Inner cover | Covers the main body to protect it. |
|
| |
3 | Wing locker | Push a long thin screwdriver into its narrow spot and press it outward when you want to |
|
| |
remove the inner cover. |
|
| |||
|
|
|
| ||
4 | Main body | Includes a lens, a switch board, a PCB board, screws, and such. |
|
| |
5 | Mount bracket | Used as a ceiling or wall fixture. It is fixed using three long tab screws provided in the |
|
| |
package. |
|
| |||
|
|
|
| ||
6 | Ceiling mount opener | Remove it for line connection to the ceiling when it is installed on the ceiling. |
|
| |
|
|
|
|
| |
7 | Zoom lever | Using this lever, the lens zoom can be adjusted and fixed. |
|
| |
ENG | |||||
|
|
|
| ||
8 | Focus lever | The lens focus can be adjusted by rotating it left or right. Rotate it clockwise for fixing. |
| ||
|
|
|
|
| |
9 | Tilt fixing screw | Using this screw, the slope of the lens can be adjusted and fixed. |
|
| |
|
|
|
|
| |
10 | This switch is used to set and adjust the settings of the camera’s functions. |
|
| ||
|
|
|
|
| |
11 | Groove mark | To attach the Main body to the Mount bracket, align this groove mark on the Main body with |
|
| |
the wide groove in the CAMERA FRONT side on the Mount bracket. |
|
| |||
|
|
|
| ||
12 | Locker | Used to open or close the Cover dome. To open the cover dome, press the locker. |
|
| |
|
|
|
|
| |
|
| Push it outward and rotate the main body in UNLOCK direction when you want to remove |
|
| |
13 | Lock releaser | the Mount bracket from the Main body or to remove the installed camera from the Mount |
|
| |
|
| bracket. |
|
| |
|
| Connect the Video connector to BNC cable and Power connector to power adapter. |
|
| |
14 | Cable | EXT. D/N is a port for DAY/NIGHT conversion. |
|
| |
|
| High(DC +3V ~ +5V): DAY(COLOR) Mode. |
|
| |
|
| Low(0V): NIGHT (BW) Mode. |
|
| |
English – 9