Samsung SADT-101WM, SCC-C4201P ❿EXT, ❿AUTO

❿AUTO...

This menu automatically converts the COLOR Mode into the BW Mode

Eor vice versa depending on illumination. In low illumination

environments, it turns off the IR Filter to raise sensitivity, otherwise it turns on the IR Filter to lower sensitivity.

If you select the AUTO menu and press the [Enter] key, the BW LEVEL Control AUTO BW submenu will appear on the menu screen. You will be able to send out the BURST signal by turning on or off in this menu, set up the DURATION TIME for conversion, or set up the standard brightness level for converting the COLOR mode into the BW mode.

CAMERA ID	ON...		(AUTO BW)
IRIS	DC...
BLC/WDR	OFF
COLOR/BW	AUTO...
SHUTTER	OFF
AGC	- - -	press the
WHITE BAL	ATW	[ENTER] key	BURST	ON
SYNC	INT		LEVEL	LOW
SPECIAL	...		DURATION	S - I - - - - -	L
EXIT	QUIT		RET

❿EXT...

This menu automatically converts the COLOR Mode into the BW Mode

or vice versa depending on illumination with an external sensor. If youE select the EXIT menu and press the [Enter] key, the EXTERNAL BW

submenu will appear on the menu screen. You will be able to send out the BURST signal by turning on or off in this menu.

CAMERA ID	ON...		(EXTERNAL BW)
IRIS	DC...
BLC/WDR	OFF
COLOR/BW	EXT...
SHUTTER	OFF
AGC	OFF	press the
WHITE BAL	ATW
		[ENTER] key
SYNC	INT
SPECIAL	...		BURST	ON
EXIT	QUIT		RET

28 29