Samsung FLICKERLESS, REVERSE, DETAIL, Y-LEVEL, C-LEVEL

FLICKERLESS

When this is set to [ON], the shutter speed is set to 1/100 sec (for NTSC) or 1/120 sec (for PAL) to prevent from flickering by the discordance between vertical synchronization frequency and on-and-off frequency of the light.

REVERSE

It is used to mirror video signals horizontally, vertically, or both.

DETAIL

It is used to control the horizontal or vertical distinction.

Y-LEVEL

It is used to set the levels for the Sync signal and the entire brightness signal of the video signal.

C-LEVEL

It is used to set the levels for the Burst signal and the entire colour signal of the video signal.

POSI/NEGA

It is used to output as it is, or mirror the video brightness signal.

RS-485

If you press the SETUP switch when [...] is selected in the [RS-485] menu, the corresponding screen appears.

(SPECIAL)		(RS-485)
LANGUAGE	ENGLISH
VIDEO SET	...
RS-485	...
ZOOM SPEED	4
DIGITAL ZOOM	OFF
DISPLAY ZOOM	OFF
SYSTEM INFO	...
CTRL TYPE	A	PROTOCOL	SAMSUNG
V-SYNC	INT	BAUD RATE	9600
RET		ADDRESS	0
		RET

You can set the PROTOCOL, BAUD RATE, and ADDRESS (range: 0 to 255) for this communication.

32