Samsung SCC-C4307P ❙FOCUS MODE, ❙MOTION DET, MF :

❙FOCUS MODE

In the FOCUS MODE MENU, the Focus method can be set to ONEAF(One Auto Focus), or MF(Manual Focus).

✔ONEAF : In the ONEAF mode, it automatically sets the focus after the zoom moves, and operates as the same in the MF mode if the zoom does not move.

✔MF : You can manually adjust the focus.

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW1
FOCUS MODE	ONEAF
MOTION DET	OFF
COLOR/BW	COLOR...
PRIVACY	OFF
SPECIAL	...
PRESET	...
EXIT	QUIT

❖The ONEAF setting can be selected only when OFF, 1/100(1/120)~1/10K, AUTO X2 is selected for the SHUTTER menu. Any Other SHUTTER setting(AUTO X4~AUTO X160) causes MF to be selected automatically for the FOCUS MODE menu.

❖ONEAF function may not possible withe types of objects listed below. For such objects, focus manually.

-High intensity objects or objects illuminated with low lighting

-Obejects shot through wet or dirty glass

-Pictures that are a mixture of distant and nearby objects

-White alls and other single-color objects

-Venetian blinds and other horizontally striped objects

❙MOTION DET

MOTION DET detects any motion. Set up this function during no human movement to detect break-in. Once detected, an ALARM signal will be given for 5 seconds. As MOTION DET detects any motion, so it can set up the motion detection sensitivity. Select ON... and press [ENTER] and the MOTION DET submenu screen will appear.

23

CAMERA ID	OFF			(MOTION DET)
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW1	Press the
FOCUS MODE	ONEAF
MOTION DET	ON...		ENTER
COLOR/BW	COLOR...		button.
PRIVACY	...
SPECIAL	...			AREA	PRESET...
PRESET	...			SENSITIVITY	L	---I---	H
EXIT	QUIT			RET

If you select ON and press the ENTER button, the MOTION								E
DET screen will come up. You can set the AREA to which the
Motion Detection function will be applied to either PRESET or
USER. If you set the AREA option to PRESET, the Motion
Detection function will be applied to the areas preset as factory
defaults. If you set the AREA option to USER and press the
ENTER button, you can change the area size and position and
select the area where you want to apply the Motion Detection
function. You can specify the size of the area by using the UP,
DOWN, LEFT, and RIGHT buttons. If the area is not flashing,
press the ENTER button. When the area starts flashing, use the
UP, DOWN, LEFT and RIGHT buttons to specify the location of
the area. Use the ENTER button and the UP, DOWN, LEFT,
and RIGHT buttons to specify the size of the area and to
position the area. Press the ENTER button again to exit the
AREA setting menu. You can use the SENSITIVITY option to
set the motion detection sensitivity. The higher the setting, the
more sensitive the motion detection.
	(MOTION DET)						SIZE
					Press the
						ENTER
						button.
	AREA	USER...
	SENSITIVITY	L	---I---	H			LOCATION
	RET

❖MOTION detection function operates based on the brightness change within the setup region. Therefore, erroneous operation may occur depending on the brightness difference between the background and the object that is being taken, or the status of the area setup, etc.

24