Samsung SCC-C6453P English _9

2.Use the three “SCREWS” to fi x the “FRAME SET” on a “CAMERA” installation position.

FRAME SET

English

SCREW

SCREW

ADAPTOR

SCREW

<Fixing Hole Diagram>

3.Connect external cables to the “CONNECTORS(ALARM IN, POWER, RS-485, ALARM OUT)”and connect the “CONNECTOR” to the “ADAPTOR”.

Insert the cable into the “FRAME SET”, and close the “ADAPTOR”.

		FRAME SET
POWER INPUT ALARM OUT		ADAPTOR
ALARM IN	RS-485

SNAP FIT

BNC JACK

INSULATION TUBE

M Then, wrap the “BNC JACK” with the “INSULATION TUBE”, and use an insulation tape to seal up the end of the “INSULATION TUBE” so that the “BNC JACK” does not protrude outside of the “INSULATION TUBE” coating.

For more information about cable connection, refer to “Connecting the adaptor cable”. (page 17)

English _9