2.Use the three “SCREWS” to fi x the “FRAME SET” on a “CAMERA” installation position.
FRAME SET
English
SCREW
SCREW
ADAPTOR
SCREW
<Fixing Hole Diagram>
3.Connect external cables to the “CONNECTORS(ALARM IN, POWER,
Insert the cable into the “FRAME SET”, and close the “ADAPTOR”.
|
| FRAME SET |
POWER INPUT ALARM OUT | ADAPTOR | |
ALARM IN |
|
SNAP FIT
BNC JACK
INSULATION TUBE
M Then, wrap the “BNC JACK” with the “INSULATION TUBE”, and use an insulation tape to seal up the end of the “INSULATION TUBE” so that the “BNC JACK” does not protrude outside of the “INSULATION TUBE” coating.
For more information about cable connection, refer to “Connecting the adaptor cable”. (page 17)