
FLICKERLESS
This will prevent possible screen distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting; if set to <ON>, the shutter speed will be fixed to 1/120 second.
If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS> menu is not available.
XDR
This will correct a brightness difference between different scenes for the optimal visibility by calculating the ambient luminance contrast in a certain unit of pixels. The higher the value is, the higher the correction level is.
DAY/NIGHT
You can specify a recording mode according to the scene.
For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 18)
1.Select <CAMERA SET> - <DAY/NIGHT>.
2. Select a screen transition mode according to the illumination, and set options as appropriate.
[2]
y DAY : Fixed to DAY mode, regardless of the scene.
y NIGHT : Fixed to NIGHT mode, regardless of the scene.
If BURST is set to <ON>, the burst signal will be output along with the
yAUTO : According to the luminance, this
will switch DAY to NIGHT mode, or vice |
|
|
|
| AUTO |
|
| |
|
|
|
|
| ||||
versa. |
|
|
|
|
| |||
BURST |
|
|
| OFF | ||||
- BURST : If set to <OFF>, the burst | DAY | ¨ | NIGHT |
|
|
|
| |
|
|
|
| MID | ||||
signal will not be output in NIGHT mode. | BRIGHTNESS |
|
|
| ||||
DWELL TIME |
|
|
| 2SEC | ||||
- DAY¨NIGHT BRIGHTNESS : Specify |
|
|
| |||||
NIGHT¨DAY |
|
|
|
| ||||
the brightness level switching from | BRIGHTNESS |
|
|
| MID | |||
COLOR to BW fi lter. | DWELL TIME |
|
|
| 5SEC | |||
MASK AREA | 1 2 | |||||||
|
Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.
-DAY¨NIGHT DWELL TIME : Time required to determine the fi lter switch.
-NIGHT¨DAY BRIGHTNESS : Specify the brightness level switching from BW to COLOR fi lter. Adjusting from HIGH to LOW will cause to switch the fi lter in a darker screen.
English