yALARM IN SET : Select the alarm sensor operation between <NO>, <NC> and <OFF>.
yALARM OUT SET : Set the alarm out port matched to the alarm input port.
yAUTO SET : Sets the pattern and scan
action for the corresponding alarm input. When the alarm is generated, the
camera moves to the preset position coupled to the corresponding alarm. Presets 1 ~ 8 are coupled with alarms
1 ~ 8 inputs respectively, and the preset
9 is coupled to the motion detection. The camera stops and remains in the corresponding preset position for the defi ned <DWELL TIME>, and performs
pattern or scan action defi ned by the <AUTO SET>. Setting to <OFF> will discard with the pattern or scan action after moving to the preset position.
-PATTERN 1 ~ 3 : Defi ned pattern action
-HALF1 : Patterns 1 and 2 in serial action
-HALF2 : Patterns 2 and 3 in serial action
-WHOLE : Patterns 1, 2 and 3 in serial action
-SCAN 1 ~ 4 : Predefi ned SCAN action
M The <ALARM1> is used as external switching signal if the <DAY/NIGHT> is set to <EXT>.
English
yAUX OUT CONTROL : Sets whether to sustain the alarm output despite of the alarm generation or to output alarm out signal while the coupled alarm is alive.
When selected <OFF>, outputs alarm only if the alarm is generated. When selected <ON>, it always outputs alarm out signal despite of the alarm generation.
|
| AUX OUT CONTROL |
|
|
|
|
|
|
|
OUT1 |
|
|
| OFF |
OUT2 |
|
|
| OFF |
OUT3 |
|
|
| OFF |
