setup
3.Select each item and set appropriately.
POSITION : Set the starting and ending positions for the <AUTO PAN>.
Move to the setting screen and adjust pan/tilt to the desired starting position, and then press [ENTER].
Again, adjust pan/tilt to the desired ending position and press [ENTER] to fi nish <AUTO PAN> setup.
|
| AUTO PAN 1 |
|
|
| |
|
|
|
|
|
|
|
POSITION |
|
|
|
|
| |
DIRECTION |
|
|
| LEFT | ||
ENDLESS | [10] |
|
| OFF | ||
SPEED |
|
|
|
| ||
|
|
|
| |||
DWELL TIME |
|
|
| 3SEC | ||
DIRECTION : Sets the direction of the camera’s movement from the starting to the end position. (Based on panning)
<RIGHT><LEFT>
START | START |
END | END |
ENDLESS : Instead of shuttling between start and end positions, the camera turns 360° endlessly while stops for the <DWELL TIME> at both positions.
SPEED : Sets the moving speed of the camera, from 1 to 64.
DWELL TIME : Sets the dwell time at the starting and ending positions, from 1 to 60 seconds.