Samsung SDC16809/YL installing your dryer, Hose Connecter, connected firmly, Connecting the drain hose, Connecting the direct-hose, 2.Connect the end of the hose to the tap

installing your dryer

Connecting the drain hoseThe end of the drain hose can be positioned in three ways:

1.Over the edge of a wash basin: The drain hose must be placed lower than 90cm. If the end of the drain hose needs to be placed above the ground, we recommend a height of 60cm ~ 90cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.

Drain hose

90 cm

Hose guide

Cable Tie

2.Assemble the drain hose and the hose guide and fix them with the cable-tie.

3.You can drain the condensed water by connecting the accessory hose (long drain hose) to the drain-outlet directly.

Connecting the direct-hose

You can immediately drain the condensed water that comes out while drying, by connecting the drain hose to the tap.

1.Assemble the hose connector and the hose.

Since there is a danger of water leaking from the hose CAUTION connecter and accessory hose, make sure that they are

connected firmly.

Hose Connecter

2.Connect the end of the hose to the tap.

English - 16

SDC16809-02885Q-03_EN.indd Sec3:16 2014-08-22 ￿￿ 5:06:16