Samsung SDC16809/YL DRYER YOUR INSTALLING, 11.Fasten the screw in the bottom hole, 15. Align the door with the fixing holes, 8. Fasten the 16 screws in the correct positions

8. Fasten the 16 screws in the correct positions.

9. Note that two of the screws have a different length from the others. (Use the longer screws for the door-lever.)

10.Move the position of the screw at the back of the door-hinge.11.Fasten the screw in the bottom hole.12.Remove the two screws holding the front-frame at the left.13.Remove the two screws holding the holder-lever at the left.

Holer-Lever

14.Now, move to the right side of the product and fasten the two screws holding the front-frame and the two screws holding the lever-holder.

15. Align the door with the fixing holes.16. Fasten the two screws holding the door-hinge.

Inside the drum

You can restore the direction the door opens by following the procedures above, if necessary.

English - 19

DRYER YOUR INSTALLING

SDC16809-02885Q-03_EN.indd Sec3:19 2014-08-22 ￿￿ 5:06:16