Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner, select the Energy saving mode with the Energy saving button.
1If necessary, press the
Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2Select COOL mode by pressing the
Note You can select the Energy saving mode only in COOL mode.
3Press the
Result: ◆ The indoor unit beeps.
◆The air conditioner runs in the Energy saving mode.
◆The outer air flow blade moves up and down.
◆To stop the Energy saving mode, press the
4To adjust the temperature, press the
Note If you want to adjust temperature under 26°C, cancel the Energy saving mode before adjusting the temperature.
5To select the fan speed, press the
6To control the direction of the air flow, refer to pages 16 and 17.