Removing Excess Humidity
ENGLISH
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
1 | If necessary, press the | (On/Off) button. | |
| Result | : ◆ The OPERATION indicator on the indoor unit comes on. | |
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
It will start up normally after three minutes.
2 | If the | is not displayed at the top of the remote control, press the |
| MODE button on the remote control one or more times until it appears. | |
| Result | : ◆ The indoor unit beeps each time you press the MODE button. |
N o te You can change modes at any time.
3To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result | : ◆ Each time you press the TEMPERATURE buttons: |
-The temperature is adjusted by 1°C
-The indoor unit beeps
◆The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.
4 To control the direction of the air flow, refer to page 15.E- 13