Samsung SH12UA1 Setting the Sleep Timer, To Cancel the Sleep Timer, The, Note, page, button, button, Result, Cooling, is no l, Press the, four hours, onger displayed

Setting the Sleep Timer

The Sleep Timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of six hours.

Note	If you wish to switch the unit off at a specific time, refer to
	page 17.

1 Make sure that you have selected either COOL or HEAT mode.

2	Press the		button	one or more times until	appears on the
	remote	control.
	Result	:	◆ The indoor unit beeps.

◆The SLEEP indicator on the indoor unit lights up.

◆The air conditioner will be controlled as indicated in the illustrations below.

Cooling	The temperature is increased
	by 1°C every hour.
	When it has been increased
	by 2°C (after two hours), the
	temperature is maintained for
	four hours.

2 ° C

1° C

Set
TEMP.	1hr 2hr	6hr
	Start	Stop
	time	time

Heating The temperature is decreased by 1°C every hour. When it has been decreased

by 2°C (after two hours), the temperature is maintained for four hours.

		Start		Stop
		time		time
Set			1hr 2hr	6hr
TEMP.	-1 ° C
-2		° C

To Cancel the Sleep Timer

If you no longer wish to use the Sleep Timer that you have set, you can cancel it at any time.

Press the		button.
Result	:	◆	The indoor unit beeps.
		◆	The	is no l	onger displayed.
		◆	The air conditioner operates normally.

E- 18