Samsung SHR-4160P manual 74

Transfer Protocol Settings

●You may choose the protocol type, either TCP or UDP. ADSL setup in the IP setup page can be made only to TCP.

●Port(TCP) can be selected from 554 to 998, increasing by 4.

Once the first digit is chosen, the rest 3 digits will follow the first digit.

●Port(UDP) can be selected from 8000 to 9760, increasing by 160. Once the front port is chosen, the rest ports will change accordingly.

●Unicast/Multicast has the default of Unicast and you may choose Multicast.

●Multicast IP shall be set to Multicast from Multicast/Unicast to be activated and for IP setup.

Sets up the D-Class IP address from 224.0.0.0 to 239.255.255.255.

●TTl shall be also set to Multicast from Multicast/Unicast to be activated and to choose a value from 0-255. The default is 5.

Note

If you want to connect IP Router with the main body of SHR-4160N/P, you shall designate a port for SHR-4160N/P in the IP Router setup menu.

The SHR-4160N/P main body uses 4 ports for TCP communication and further 160 UDP ports when the procotol type is set to UDP. In addition, if you want to use the DHCP function backed by IP Router to allocate Dynamic IP to the main body of SHR-4160N/P, you shall designate a port for the IP which SHR-4160N/P has been allocated by the IP Router setup menu.

If you use IP Router, you are recommended to rather determine IP and Port numbers to be allocated to the main body of SHR-4160N/P from the IP Router setup menu, set the connection mode to Static IP for the main body of SHR-4160N/P, and input the determined IP and Port number in IP Router than use the DHCP function.

Please refer to the IP Router User’s Manual or call the manufacturer to set up IP Router.

5-30