Callback Settings
●Callback delivers a callback message to the IP where SmartViewer is already running when an event corresponding to Alarm, Motion Detection, or Video Loss occurs from the set.
●On/Off : Off is the default and On is optional.
●IP Address : IP setup is available only when On/Off is set to On. Sets up the IP address of a PC where SmartViewer is already running.
●Port(UDP) : You may choose a value from 7900 to 7999, increasing by 1. Sets up the port value of Callback Connection set by SmartViewer.
●Retry : You may choose a value from 1 to 20, increasing by 1.
-Though Callback is set to ON, there will be no Callback message unless Alarm, Motion Detection, or Video Loss is set by Event Record.
-Unless you click the Callback button of SmartViewer, SmartViewer does not receive any Callback message.