CONNECTING POS DEVICE
1.You can connect a POS device to the
2.Connection setup for the
<POS Device Setup> button and set <Baud rate, Parity, Data, Stop bit and Transfer Type>. (Page 45)
CONNECTING THE ALARM INPUT/OUTPUT
The Alarm In/Out port at the back is composed of the following.
1. Alarm In/Out Port on 7080/7082/8080/8082
2. Alarm In/Out Port on 7160/7162/8160/8162
•ALARM IN 1 ~ 8
•ALARM IN 1 ~ 16
•ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing.
•ALARM OUT 1 ~ 4 : Alarm Output Port
DEVICE OTHER WITH CONNECTING
ALARM OUT |
| ALARM IN |
| ALARM IN |