You can set the
Using the mouse may help easy setup.
3.Use the up/down buttons (▲▼) in <Device> window to move to <Remote Device>, and press [ENTER] button.
4.Use direction buttons (▲▼◄ ►) to move to the desired item, and press [ENTER] button.
5.Set the values of each communication setup of the remote device.
•Baud rate : Baud rate settings of the DVR, PTZ camera and system keyboard should be matched for proper operations.
6.Make sure to match IDs of the DVR, System Keyboard and Remote Control, and press <OK>.
|
|
|
|
|
|
|
|
|
|
| Baudrate |
| Parity | Data |
|
| Stop Bit | Transfer type |
|
| 9600 |
| None | 8 |
| 1 | Half Duplex |
| |
|
|
|
|
|
|
|
|
|
|
| System Keyboard |
| OFF | ID | 00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Remote Control |
| ON | ID | 32 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OK Cancel
DVR THE USING ●
M For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 13)
POS DevicesYou can set properties of POS devices connected to the DVR.
A POS device connection requires channel, preset, and port/Ethernet settings.
Using the mouse may help easy setup.
3.Use the up/down buttons (▲▼) in <Device> window to move to <POS Device>, and press [ENTER] button.
4.Use direction buttons (▲▼◄ ►) to move to a desired item, and set the value.
•POS USE : When selected <POS USE>, DVR and POS will be connected.
J If you change settings for the device and press <OK> while the <POS USE> is not checked, the changes for POS device will not be saved.
POS USE
POS Device Setup
POS | CH | Preset |
| Port/Ethernet |
1 | None | No preset | None | |
2 | None | No preset | None | |
3 | None | No preset | None | |
4 | None | No preset | None | |
5 | None | No preset | None | |
6 | None | No preset | None | |
7 | None | No preset | None | |
8 | None | No preset | None | |
|
|
|
| Previous/Next Page |
|
| OK | Cancel |
|
•POS Device Setup : Sets the communication setups for the POS device and DVR.
It is independent to the Remote Device setup.
POS USE
POS Device Setup
| POS |
| CH |
| Preset |
|
|
| Port/Ethernet |
| ||
| 1 |
| None |
| No preset |
|
|
|
| None |
| |
| POS | Device Setup |
| No preset |
|
|
|
| None |
| ||
| 2 |
| None |
|
|
|
|
|
| |||
| 3 |
| None | Parity | No preset |
| Stop bit |
| None |
| ||
| Baudrate |
| Data |
|
| Transfer type |
| |||||
| 9600 |
| None | 8 |
| 1 |
| Half Duplex |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| 6 |
| None |
| No preset | Cancel |
|
| None |
| ||
|
|
|
|
|
| OK |
|
|
|
| ||
| 7 |
| None |
| No preset |
|
|
|
| None |
| |
| 8 |
| None |
| No preset |
|
|
|
| None |
| |
|
|
|
|
|
|
|
|
|
| Previous/Next Page |
|
OK Cancel