Samsung PLAYBACK, English _67, Play, supported, Backup : Click, PLAY & SEARCH ●, •: Switches to Live mode, -Device: Select a backup device

PLAYBACK

Play

You can play data stored in the HDD and backup a desired portion of the data.

Using the mouse may help easy setup.

1.In Live mode, click <Play> in the right-click menu or

< > in the launcher menu, or press the Play button on the remote control or the front panel.

2.Use the up/down button (▲▼) to select a menu.

For data search, refer to <Search>. (Page 64)

Scene Mode

SPOT OUT

Audio Off

Freeze

Stop Alarm

Record

Play

Search

Backup

Main Menu

Shutdown

Launcher hide

Logout

PLAY & SEARCH ●

PTZ Alarm Freeze

3.Select a data item and click <Play> in the Search menu. The selected data is played and the play launcher appears on the screen.

If there is an existing data, <Play> will start immediately without performing the search.

• : You can play up to 4 channels in real time.

- In a split mode, the real time playback may not be

supported, depending on the record quality, resolution
and number of channels. And some frame rates may be	REC
supported.

•Playback Information : Displays the date and time of the current data in the top corner.

•Mode Switch : Select a desired play mode or press the [MODE] button to switch the mode in the sequence of 1-split, 4-split, 9-split, 16-split and 13-split.

The grey area in the center of the 13-split mode plays the Live channel. The default channel of the Live mode is CH1, which can be changed later.

• : Switches to Live mode.

• REC : Records all channels in Live mode.

•Play Time : Displays the time and date of the current video.

•Play Bar : Displays the time of recorded data in the selected channel for the past 24 hours; the red gridline indicates the current play time.

M Speed : Supports various speed options of x1, x2(-2), x4(-4), x8(-8), x16(-16), x32(-32) and x64(-64).

 Slow : Supports slow speed options of x1/2(-1/2), x1/4(-1/4) and x1/8(-1/8).

•Backup : Click < > to set the current time to the start time of backup; you can specify a backup area using the mouse (yellow triangle).

Click < > again to set the current time to the end time of the backup and the “Backup Range” window appears.

-Format: Supports formats of DVR, AVI and SEC. Refer to a list of formats in “Setting the Backup”. (Page 54)

-Device: Select a backup device.

-Check Capacity : Enables you to check the capacity of the selected storage device.

Backup Range

Start		End
2009-01-01 00:01:06		2009-01-01 08:25:45
Device		Format
	None			DVR
Folder	\20090101\	Filename		0001	Change
Check capacity			Backup
			Used
			Free
	Backup	Cancel

4.If you want to return to the Live screen in Play mode, click < > in the launcher menu or press the [] button on the remote control or the front panel.

English _67