Samsung SMX-F40SP Anti-Shake(HDIS), Tip, Submenu Items, Press the MENU button to exit the menu, 3.Press the MENU button to exit the menu

Anti-Shake(HDIS)

Use the Anti-Shake (HDIS) function to compensate for unstable images caused by shaking movements when holding the camcorder.

PRECHECK!

Select the Record ( / ) mode by pressing the MODE button. page 24

1.Press the MENU button  Control joystick (/)  “Anti-Shake (HDIS).”

2.Select the desired submenu item with the Control joystick (/), and then press the OK button.

3.Press the MENU button to exit the menu.

Submenu Items

items	contents	on-screen
		display
“Off”	Disable the function.	-
“On”	The Anti-Shake (HDIS) function is enabled to
	compensate for shaking movements.

STBY 0:00:00 [475Min]

Anti-Shake(HDIS)

Off

On

Exit

STBY 0:00:00 [475Min]

Anti-Shake(HDIS)

Off

On

Exit

Tip

Use the Anti-Shake function in the following cases:

•Recording when using the zoom extensively.

•Recording a close up picture of a small object

•Recording while walking, or moving

•Recording through the window, from inside a vehicle

•The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to On.

•Gross camcorder shake may not be entirely corrected even if “Anti-Shake (HDIS): On” is set. Firmly hold the camcorder with both hands.

•When this function is set to “On,” the actual movement of the subject and the movement displayed on the screen may be slightly different.

•When recording in dark lighting at high magnifi cation with this function set to “On,” may cause after images. In this case, we recommend using a tripod (not supplied) and turning the “Anti-Shake (HDIS)” to “Off.”

59