setting static ip
MANUAL NETWORK SETTING
Run the <IP Installer.exe> program and display the camera list found on the screen. For the initial run, the [Auto Set] and [Manual Set] button are all disabled.
• Check the MAC address in System Information under the Setup menu of the camera.
• The [Auto Set] and [Manual Set] button are activated.2. Click the [Manual Set] button.1
| • The Manual Set window appears. |
|
|
|
|
|
|
2 | ||||||
• The <IP Address>, <Subnet Mask>, <Gateway> and <HTTP |
|
|
|
|
|
|
Port> values of the camera are displayed in their default values. |
|
|
|
|
|
|
| • The password is set to “4321” by factory default. |
|
|
|
|
|
|
| 3. Set up the IP related settings in the <ADDRESS> fi eld. |
|
|
|
|
|
|
| • <MAC Address>: The MAC Address is automatically | 3 |
|
|
|
|
|
|
|
|
|
|
| |
• <IP Address>: Set it according to the private IP address range provided by the IP Router.
ex) 192.168.1.2~254, 192.168.0.2~254, or 192.168. XXX.2~254• <Subnet Mask>: The IP Router’s <Subnet Mask> becomes camera’s <Subnet Mask> value.
• <Gateway>: The IP Router’s <Local IP Address> becomes camera’s <Gateway> value.
If not using an IP router :• For the <IP Address>, <Gateway> and <Subnet Mask> settings,| contact your network administrator. |
|
|
|
| |
M For the menu location of Internet Connection Type or DHCP selection, refer |
|
|
|
| |
3 | ||
| to the IP router’s documentation. |
|
|
46 – 10x Network Mini Smart Dome Camera