MENU |
| DESCRIPTION |
|
| |
Caption | The <Caption> function is supported when the external analog signal from the Video input contains | |
| subtitles. | |
| • | <Caption> : |
| • | <Mode> : |
| • | <Channel> : |
| • <Field> : | |
|
| The <Caption> function will not operate in <PC> (including components) or <HDMI> mode. |
|
| Depending on the external signal, a change to the channel or <Field> settings may be required. |
|
| Each <Channel> and <Field> contains different information. <Field><2> carries additional |
|
| information to supplement information contained in <Field><1>. |
|
| (e.g. If English subtitles are provided on <Channel><1>, Spanish subtitles will be provided on |
|
| <Channel><2>.) |
|
| |
Reset | Using this function, you can reset various settings to the factory default settings. | |
| • <Factory Default> : Changes the settings to the factory defaults. | |
| • <Reset Filter Time> : Resets the filter time. | |
|
|
|
MENU | DESCRIPTION |
|
|
Language | Using this function, you can select the language used for the menu screen. |
|
|
Menu Option | • <Position> : You can move Menu Position up/down/left/right. |
| • <Transparency> : You can set the translucency of the menu. |
| • |
| • <Display Time> : You can set the display time of the menu. |
| • <5 |
|
|
Sound | The projector comes with an internal 7W (mono) speaker. Use the equalizer settings below to adjust |
| the sound. |
| • |
|
|
Filter Check Time | Sets the check period for the filter. (Unit: hours) |
| • |
| If the filter usage time is larger than the filter check period, the filter check message is |
| displayed for 1 minute whenever the projector is turned on. |
| Filter check message: "<Check the filter, and if necessary, clean or replace it.>". |
|
|
Using |