Samsung SP-L331 2-16Connecting an AV device using a D-Subcable

2-16 Connecting an AV device using a D-Sub cable

Make sure that the AV device and your projector are turned off.

1.Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable. - For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-10.

2.Connect the [PC/DVI AUDIO IN] terminal at the back of the projector to the Audio out terminal of your AV device using an audio cable (Not supplied).

2-16 Installation and Connection