You can attach the projector to a network that uses a Static IP address, which corresponds to using a dedicated lease line. If your network uses Static IP addresses, you must get the IP address, subnet mask, gateway, and DNS server values from your Internet Service Provider (ISP), turn on the Network function in the projector's Menu, and then enter the values into the Network function manually.
To connect to a Static IP address network, follow these steps :
1.Connect a LAN cable between the LAN port on the wall and a wired or wireless IP router.
2.Connect a LAN cable between the [LAN] port on the back of the projector and the wired or wireless IP router.
3.Turn on the projector, and then press the Menu button.
4.Select <Setup> → <Network> → <IP Setting> → <IP Setting> → <Manual>.
5.Press the Enter button.Use the
6.When done entering all the values for IP Address, press Enter button and then repeat the steps for Subnet mask and Gateway.
7.When done entering all the values, press the Menu button or Return button to exit.
Installation and Connection |