Settings
5.You have three ways to complete the Wi-Fi connection:
•Through the Wi-Fi device.
•Through the product using PBC.
•Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.On the
2.When you have completed the procedure, you should see a
3.The Connecting
Through the Product Using PBC
1.Select the
2.Select PBC, and then press the v button. The PBC pop-up appears.
3.Press the PBC button on the Wi-Fi Direct device within 2 minutes.
4.The Connecting
Through the Product Using a PIN
1.Select the
2.Select PIN, and then press the v button. The PIN pop-up appears.
3.Note the PIN code in the
4.The Connecting
NOTE
\\ The wired or wireless network connection will be disconnected when you use the
\\ Some
Soft AP
This product provides a function as a wireless Access Point.
Soft AP lets you connect other
It requires that you create a security key which you must enter into the other
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Soft AP, and then press the v button.
4.Select On or Off, and then press the v button.
< To Set the Soft AP Security Key >
1.On the Soft AP screen, select Security Key, and then press the v button. The Security Key screen appears.
2.On the Security key screen, enter a security key. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the v button.
3.When done, use the the ▲▼◄► buttons to move to DONE at the bottom of the screen, and then press the v button.
When you connect a