How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1.Follow Steps 1 through 2 in the “How to set up automatically” procedure.
2.Select the IP Settings on network test screen.
3.Set IP Mode to Manual.
4.Press the dbutton on your remote to go to the IP Address.
| IP Settings |
IP Mode | Manual |
IP Address | 0 . 0 . 0 . 0 |
Subnet Mask | 0 . 0 . 0 . 0 |
Gateway | 0 . 0 . 0 . 0 |
◀ 5. Enter the IP Address, Subnet Mask, Gateway, | DNS Mode | Manual | ▶ |
|
| ||
and DNS Server values. Use the number | DNS Server | 0 . 0 . 0 . 0 |
|
|
|
| |
buttons on your remote to enter numbers and |
| OK |
|
|
|
| |
the arrow buttons to move from one entry field to | ● The displayed image may differ depending on |
| |
another. | the model. |
|
|
|
|
|
6.When done, select the OK.
7.The network test screen appears, and network setting is done.
English