Samsung UA40D6600WNXUM manuals
TV and Video > Televisions
When we buy new device such as Samsung UA40D6600WNXUM we often through away most of the documentation but the warranty.
Very often issues with Samsung UA40D6600WNXUM begin only after the warranty period ends and you may want to find how to repair it or just do some service work.
Even oftener it is hard to remember what does each function in Televisions Samsung UA40D6600WNXUM is responsible for and what options to choose for expected result.
Fortunately you can find all manuals for Televisions on our side using links below.
Samsung UA40D6600WNXUM Manual
46 pages 0 b
229 pages 0 b
3 ❑❑ Using the INFO button (Now & Next guide)4 ❑❑ Using the Channel Menu7 : Selectto set at your convenience. If you select , you can set the day you want Date 12 ❑❑ Using the Channel14 LockUnlock ●● This function is available only when the Channel Lock is set to On NN This function may not be supported depending on the region Edit Channel Number: Edit the number by pressing the number buttons desired 15 Delete: Delete a channel to display the channels you wantNN A gray-colouredchannel indicates the channel has been deleted Channel Status Display Icons 16 ❑❑ Using Favourite Channels19 ❑❑ Memorising Channels21 ■■ Manual TuningScans for a channel manually and stores in the TV Press the l/ rbutton to select New Set the Channel, Frequency and Bandwidth NN The Bandwidth function is supported in New zealand and Singapore only Press the dbutton to select Search. When scanning has finished a channel is updated in the channel list 23 NN Channel mode●● C (aerial channel mode) / S (cable channel mode): These two modes allow 24 ❑❑ Other Features25 ■■ Fine Tune(analogue channels only) automatically during the search and store operation. If the signal is weak or clear NN Settings are applied to the channel you’re currently watching the right-handside of the channel number in the channel banner NN To reset the fine-tuning,select Reset 26 ❑❑ Changing the Preset Picture Mode27 ❑❑ Adjusting Picture Settings28 ❑❑ Changing the Picture Size29 –– 4:3: The default setting for a movie or normal broadcastingNN Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty 1080i / 1080p) or Component (1080i / 1080p) signals are inputted –– Smart View 1: Reduces the 16:9 picture by 50% –– Smart View 2: Reduces the 16:9 picture by 25% Smart View 1 is enabled only in HDMI mode NN Smart View 2 is enabled only in HDMI or DTV mode 31 NN Not available in PC, Component or HDMI mode32 ❑❑ Changing the Picture Options33 screen depthDynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast Shadow Detail (-2~+2):Increase the brightness of dark images Gamma: Adjust the primary colour intensity Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears NN While the Expert Pattern is running, sound is not outputted NN Only enabled on DTV, Component / HDMI mode 37 ■■ Picture OptionsOO MENUm→ Picture → Picture Options → ENTERE NN When connecting a PC, you can only make changes to the Colour Tone ●● Colour Tone (Cool / Standard / Warm1 / Warm2) NN Warm1 or Warm2 will be deactivated when the picture mode is Dynamic 39 Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense andNN Available in AV, COMPONENT (480i / 1080i) and HDMI (1080i) Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Removes drag from fast scenes with a lot of movement to provide a clearer picture NN The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but not the frequency the TV is generating for the image it is displaying by using Motion Plus function NN If noise occurs on the screen, please set up the Motion Plus to Off. If Motion Plus is Custom, you can set up the Blur Reduction, Judder Reduction or Reset manually NN If Motion Plus is Demo, you can compare the difference of on and off modes 41 ❑❑ Setting up the TV with Your PC42 ■■ PC Screen AdjustmentOO MENUm→ Picture → Screen Adjustment → PC Screen Adjustment → ENTERE that it is aligned to the centre of screen Position: Adjusts the PC screen position with direction button (u/ d/ l/ r) Image Reset: Resets the image to the default settings 43 Using Your TV as a Computer (PC) DisplaySetting Up Your PC Software (Based on Windows XP) 1.Click on “Control Panel” on the Windows start menu 2.Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-boxwill appear 3.Click on “Display” and a display dialog box will appear 4.Navigate to the “Settings” tab on the display dialog-box ●● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] 44 ❑❑ Changing the Preset Sound Mode45 ❑❑ Adjusting Sound Settings46 ●● SRS TruDialog (Off / On)SRS CS Headphone 48 ■■ 3D Audio (Off / Low / Medium / High)51 ■■ Additional SettingsDTV Audio Level (MPEG / HE-AAC):This function allows you to reduce the TV broadcast) to a desired level NN According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dBand 0dB NN To increase or decrease the volume, adjust between the range 0 and respectively 52 as a DVD playerAudio Format: You can select the Digital Audio output (SPDIF) format the input source AV receiver (0ms ~ 250ms) 56 ❑❑ Selecting the Dual f-g57 ❑❑ Setting the Network60 If you have a Dynamic Network, you should use an ADSL modem or routerthat supports Dynamic Host Configuration Protocol (DHCP). Modems and have to enter them manually. Most home networks are Dynamic Networks Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS connection. To get the IP address, subnet mask, gateway, and DNS values you can also get these values through your computer IP addresses 62 ■■ Network Setup (Auto)Network Setup How to set up automatically 1.Go to Network Setting screen To enter it, follow the directions of Network Setting ◀2. Select the Wired 3. The network test screen appears, and network setting is done 63 NN If it fails to set automatically, check the connection of LAN port68 nearby, this will result in interference and communication failureIf you apply a security system other than the systems listed below, it will not work with the TV If Pure High-throughput(Greenfield) 802.11n mode is selected and the Fi certification specifications If your wireless router supports WPS (Wi-FiProtected Setup), you can in either mode 70 ■■ Connecting to a Wireless Network for LED 6600 Series and above71 To use a wireless network, your TV must be connected to a wireless IP sharer(either a router or a modem). If the wireless IP sharer supports DHCP, your TV 74 ◀How to set up automaticallyGo to 2.Select the Wireless 79 ■■ Network Setup (WPS(PBC))How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps: Go to Select the WPS(PBC) Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network The network test screen appears, and network setting is done 81 How to set up using One Foot ConnectionTurn on the power of wireless router and TV Go to Network Settings screen. To enter it follow the directions of Network Settings Select the One Foot Connection Place the wireless router in parallel with the no larger than 25cm 83 ■■ Network Settings (Plug & Access)NN You can check for equipment that supports Plug&Access on www.samsung. com 85 5.Place the wireless router in a desired location87 If Your TV Fails to Connect to the Internet88 ❑❑ Setting the Time90 Setting the On / Off TimerOn Timer : Three different on timer settings can be made. You must set the clock first ◀the timer N The cmark indicates the day is selected 94 ❑❑ Locking Programme95 Programme Rating Lock●● Change PIN: Change your personal ID number required to set up the TV →4 → POWER (on) 96 ❑❑ Economical Solutions98 OO MENUm→ System → ENTERE■■ Language Teletext Language: Set a desired language for teletext the broadcast Preference (Primary Audio Language / Secondary Audio Language Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select a language which will be the default language when a channel is selected ■■ Subtitle Use this menu to set the Subtitle mode ●● Subtitle (Off / On): Switches subtitles on or off ●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode 103 ❑❑ Picture In Picture (PIP)106 ❑❑ Support Menu107 Sound Test (Yes / No): Use the built-inmelody sound to check for soundproblems test, make sure Speaker Select is set to TV Speaker in the Sound menu NN The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button signal strength 109 Installing the Latest VersionBy USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded 110 By Online: Upgrade the software using the InternetSetup, refer to the “Network Connection” instructions broken. Please retry downloading. If the problem persists, download by USB and upgrade By Channel: Upgrade the software using the broadcasting signal NN This function may not be supported depending on the language will be automatically searched and downloaded NN The time required to download the software is determined by the signal status 111 Alternative Software◀ ■■ Contact Samsung View this information when your TV does not work properly or when you want to to download products and software 112 ❑❑ Using the 3D function113 ❑❑ Viewing TV using the 3D function122 Before using 3D functionNN Recommended 3D operating distance 124 is optimizedThe 3D Active Glasses may not work properly if there is any other 3D Active Glasses 3D effects 125 ❑❑ Getting Started with Smart Hub126 The Gateway to all content integrated in one place●● Customize your TV, by App grouping & sorting to your taste 127 Screen Display130 Account LoginFor an application with multiple accounts, select ^to access the different accounts 131 1.Press the Red button in the Smart Hub home page2.Select ^by pressing the u/ d/ l/ rbutton. The account list appears Create Account 3.Select the desired Smart Hub ID, and the press the ENTEREbutton 134 4-4.Press the TTX/MIX button on the remote 4 times to change the input modefrom numbers to upper case 4-5.Press the 2 button on the remote 3 times to input C from upper case to lower case the ENTEREbutton Method 2: Using the Keypad of T9 type For example, suppose that you want to input “105Chang” 136 ●● You can delete the entered character using the PRE-CHbuttonthe screen NN If you want to register service later, select Connect Later 138 ❑Setting up Smart Hub139 Service ManagerTicker Autorun: You can set Ticker Autorun to come on when powering on the NN The Ticker application provides useful News, Weather, and Stock Market this feature not be supported Channel Bound Service (Off / On): Some channels support applications as an NN Only available if supported by the broadcaster 142 ❑❑ Using the Smart Hub service145 Using the Samsung Apps by categoryThe following categories are available: What’s New?: Displays newly registered applications videos Game: Displays various games such as sudoku and chess Sports: Displays various sports media such as match information, images and short length video management tools and social networking such as Facebook and Twitter 147 [Legal Statement]membership fees that are sold separately. Please visit http://www.samsung The services and availability of content through Smart Hub are subject to change from time to time without prior notice 148 SkypeSkype created a little piece of software that And if both of you are on Skype, it’s free Communicate with people around the world 150 scrolled may cause corrupted charactersActiveX is not supported Some options cannot be accessed in Tab mode. (To access such options switch to Pointer mode.) Some text may appear corrupted because the number of supported fonts is limited The response to a command on the remote or the screen display may be delayed temporarily if a web page is currently loading 12.The loading of a web page may delay or stop with some web pages 13.Copy and Paste are not supported 151 15.The number of bookmarks and logs that can be saved is limited17.The web browsing speed depends on the network conditions may not commence playback after PIP interruption and a possible refresh for the page may be required 19.The Web Browser can play MP3 audio files only 152 When you import or export the bookmark, the folder tree is not includedbe saved in “Samsung SmartTV Bookmark” folder If the time is not set in the menu (System → Time → Clock), the history information may not be saved from the list according to oldest page accessed the video/audio codec supported 153 ❑❑ Troubleshooting for SMART HUB156 ❑❑ About AllShare™158 ❑❑ Setting Up AllShare™159 ■■ MediaMedia NN The Media function is available in all devices which support DLNA DMC Allowed / Denied: Allows/Blocks the the devices Delete: Deletes the devices from the list device is turned on or tries to connect to the TV, it may appear on the list again 160 Using the Media FunctionIf the media function executes for the first time, the warning popup window appears. Press the ENTEREbutton to select Allow, then you can use Media function on that device 163 on your TV and the Digital Audio Input on the Home Theatrespeakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV 165 Anynet+ Menu166 ❑❑ Setting Up Anynet+167 ❑❑ Switching between Anynet+ Devices168 ❑❑ Listening through a Receiver169 ❑❑ Troubleshooting for Anynet+172 ❑❑ Using the Smart Hub173 ❑❑ Connecting a USB Device174 ❑❑ Connecting to the PC through network175 Photos, MusicNN DivX DRM, Multi-audio,embedded captions are not supported 178 file damage or data lossConnect a USB HDD to the dedicated USB 1 (HDD) port Do not disconnect the USB device while it is loading The higher the resolution of the image, the longer it takes to display on the The maximum supported JPEG resolution is 15360X8640 pixels is displayed folder 180 If the TV has been no input during time set in Auto Protection Time, theScreensaver will run The power-savingmode of some external hard disk drives may be released automatically when connected to the TV files on the device may not be read If a USB device connected to the TV is not recognized, the list of files on the the PC, format the device and check the connection 182 Recorded TV188 current recording process will be closedWhen recording is performed by both the PVR (Personal Video Recorder) PVR function takes precedence to the display settings of the TV If you change the input source during recording, the screen will go blank until the change is completed 190 ●● If a USB device dedicated to recording is connected, existing Timeshift orcontinue but the �(REC) button will be disabled Off timer 193 ●● Supported Subtitle Formats194 ●● Supported Video Formats199 ■■ MusicPlaying Music 1. Press the l/ r/ u/ dbutton to select the desired music file in the file list 2. Press the ENTEREbutton or �(Play) ●● During playing the music, you can search NN Only displays the files with MP3 extension 203 ■■ PhotosViewing a Photo (or Slide Show) 1.Press the l/r/u/dbutton to select the desired file in the file list 2.Press the ENTEREbutton ◀ immediately ●● All files in the file list section will be displayed in the slide show Background Music NN The Background Music cannot be changed until the BGM has finished loading 204 ❑❑ Media Contents - Additional Function206 Videos / Music / Photos Play Option menu210 ❑❑ Troubleshooting223 ❑❑ Teletext Feature227 Typical Teletext page228 ❑❑ Licence
229 pages 0 b
229 pages 0 b
3 ❑❑ Using the INFO button (Now & Next guide)4 ❑❑ Using the Channel Menu7 : Selectto set at your convenience. If you select , you can set the day you want Date 12 ❑❑ Using the Channel14 LockUnlock ●● This function is available only when the Channel Lock is set to On NN This function may not be supported depending on the region Edit Channel Number: Edit the number by pressing the number buttons desired 15 Delete: Delete a channel to display the channels you wantNN A gray-colouredchannel indicates the channel has been deleted Channel Status Display Icons 16 ❑❑ Using Favourite Channels19 ❑❑ Memorising Channels21 ■■ Manual TuningScans for a channel manually and stores in the TV Press the l/ rbutton to select New Set the Channel, Frequency and Bandwidth NN The Bandwidth function is supported in New zealand and Singapore only Press the dbutton to select Search. When scanning has finished a channel is updated in the channel list 23 NN Channel mode●● C (aerial channel mode) / S (cable channel mode): These two modes allow 24 ❑❑ Other Features25 ■■ Fine Tune(analogue channels only) automatically during the search and store operation. If the signal is weak or clear NN Settings are applied to the channel you’re currently watching the right-handside of the channel number in the channel banner NN To reset the fine-tuning,select Reset 26 ❑❑ Changing the Preset Picture Mode27 ❑❑ Adjusting Picture Settings28 ❑❑ Changing the Picture Size29 –– 4:3: The default setting for a movie or normal broadcastingNN Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention(screen burn) which are not covered by the warranty 1080i / 1080p) or Component (1080i / 1080p) signals are inputted –– Smart View 1: Reduces the 16:9 picture by 50% –– Smart View 2: Reduces the 16:9 picture by 25% Smart View 1 is enabled only in HDMI mode NN Smart View 2 is enabled only in HDMI or DTV mode 31 NN Not available in PC, Component or HDMI mode32 ❑❑ Changing the Picture Options33 screen depthDynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast Shadow Detail (-2~+2):Increase the brightness of dark images Gamma: Adjust the primary colour intensity Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears NN While the Expert Pattern is running, sound is not outputted NN Only enabled on DTV, Component / HDMI models 37 ■■ Picture OptionsOO MENUm→ Picture → Picture Options → ENTERE NN When connecting a PC, you can only make changes to the Colour Tone ●● Colour Tone (Cool / Standard / Warm1 / Warm2) NN Warm1 or Warm2 will be deactivated when the picture mode is Dynamic 39 Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense andNN Available in AV, COMPONENT (480i / 1080i) and HDMI (1080i) Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo): Removes drag from fast scenes with a lot of movement to provide a clearer picture NN The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but not the frequency the TV is generating for the image it is displaying by using Motion Plus function NN If noise occurs on the screen, please set up the Motion Plus to Off. If Motion Plus is Custom, you can set up the Blur Reduction, Judder Reduction or Reset manually NN If Motion Plus is Demo, you can compare the difference of on and off modes 41 ❑❑ Setting up the TV with Your PC42 ■■ PC Screen AdjustmentOO MENUm→ Picture → Screen Adjustment → PC Screen Adjustment → ENTERE that it is aligned to the centre of screen Position: Adjusts the PC screen position with direction button (u/ d/ l/ r) Image Reset: Resets the image to the default settings 43 Using Your TV as a Computer (PC) DisplaySetting Up Your PC Software (Based on Windows XP) 1.Click on “Control Panel” on the Windows start menu 2.Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-boxwill appear 3.Click on “Display” and a display dialog box will appear 4.Navigate to the “Settings” tab on the display dialog-box ●● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] 44 ❑❑ Changing the Preset Sound Mode45 ❑❑ Adjusting Sound Settings46 ●● SRS TruDialog (Off / On)SRS CS Headphone 51 ■■ Additional SettingsDTV Audio Level (MPEG / HE-AAC):This function allows you to reduce the TV broadcast) to a desired level NN According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dBand 0dB NN To increase or decrease the volume, adjust between the range 0 and respectively 52 as a DVD playerAudio Format: You can select the Digital Audio output (SPDIF) format the input source AV receiver (0ms ~ 250ms) 56 ❑❑ Selecting the Dual f-g57 ❑❑ Setting the Network60 If you have a Dynamic Network, you should use an ADSL modem or routerthat supports Dynamic Host Configuration Protocol (DHCP). Modems and have to enter them manually. Most home networks are Dynamic Networks Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS connection. To get the IP address, subnet mask, gateway, and DNS values you can also get these values through your computer IP addresses 62 ■■ Network Setup (Auto)Network Setup How to set up automatically 1.Go to Network Setting screen To enter it, follow the directions of Network Setting ◀2. Select the Wired 3. The network test screen appears, and network setting is done 63 NN If it fails to set automatically, check the connection of LAN port68 nearby, this will result in interference and communication failureIf you apply a security system other than the systems listed below, it will not work with the TV If Pure High-throughput(Greenfield) 802.11n mode is selected and the Fi certification specifications If your wireless router supports WPS (Wi-FiProtected Setup), you can in either mode 70 ■■ Connecting to a Wireless Network for LED 6960 Series and above71 To use a wireless network, your TV must be connected to a wireless IP sharer(either a router or a modem). If the wireless IP sharer supports DHCP, your TV 74 ◀How to set up automaticallyGo to 2.Select the Wireless 79 ■■ Network Setup (WPS(PBC))How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps: Go to Select the WPS(PBC) Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network The network test screen appears, and network setting is done 81 How to set up using One Foot ConnectionTurn on the power of wireless router and TV Go to Network Settings screen. To enter it follow the directions of Network Settings Select the One Foot Connection Place the wireless router in parallel with the no larger than 25cm 83 ■■ Network Settings (Plug & Access)NN You can check for equipment that supports Plug&Access on www.samsung. com 85 5.Place the wireless router in a desired location87 If Your TV Fails to Connect to the Internet88 ❑❑ Setting the Time90 Setting the On / Off TimerOn Timer : Three different on timer settings can be made. You must set the clock first ◀the timer N The cmark indicates the day is selected 94 ❑❑ Locking Programme95 Programme Rating Lock●● Change PIN: Change your personal ID number required to set up the TV →4 → POWER (on) 96 ❑❑ Economical Solutions98 OO MENUm→ System → ENTERE■■ Language Teletext Language: Set a desired language for teletext the broadcast Preference (Primary Audio Language / Secondary Audio Language Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select a language which will be the default language when a channel is selected ■■ Subtitle Use this menu to set the Subtitle mode ●● Subtitle (Off / On): Switches subtitles on or off ●● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode 103 ❑❑ Picture In Picture (PIP)106 ❑❑ Support Menu107 Sound Test (Yes / No): Use the built-inmelody sound to check for soundproblems test, make sure Speaker Select is set to TV Speaker in the Sound menu NN The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button signal strength 109 Installing the Latest VersionBy USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded 110 By Online: Upgrade the software using the InternetSetup, refer to the “Network Connection” instructions broken. Please retry downloading. If the problem persists, download by USB and upgrade By Channel: Upgrade the software using the broadcasting signal will be automatically searched and downloaded NN The time required to download the software is determined by the signal status 111 Alternative Software◀ ■■ Contact Samsung View this information when your TV does not work properly or when you want to to download products and software 112 ❑❑ Using the 3D function113 ❑❑ Viewing TV using the 3D function122 Before using 3D functionNN Recommended 3D operating distance 124 is optimizedThe 3D Active Glasses may not work properly if there is any other 3D Active Glasses 3D effects 125 ❑❑ Getting Started with Smart Hub126 The Gateway to all content integrated in one place●● Customize your TV, by App grouping & sorting to your taste 127 Screen Display130 Account LoginFor an application with multiple accounts, select ^to access the different accounts 131 1.Press the Red button in the Smart Hub home page2.Select ^by pressing the u/ d/ l/ rbutton. The account list appears Create Account 3.Select the desired Smart Hub ID, and the press the ENTEREbutton 134 4-4.Press the TTX/MIX button on the remote 4 times to change the input modefrom numbers to upper case 4-5.Press the 2 button on the remote 3 times to input C from upper case to lower case the ENTEREbutton Method 2: Using the Keypad of T9 type For example, suppose that you want to input “105Chang” 136 ●● You can delete the entered character using the PRE-CHbuttonthe screen NN If you want to register service later, select Connect Later 138 ❑Setting up Smart Hub139 Service ManagerTicker Autorun: You can set Ticker Autorun to come on when powering on the NN The Ticker application provides useful News, Weather, and Stock Market this feature not be supported Channel Bound Service (Off / On): Some channels support applications as an NN Only available if supported by the broadcaster 142 ❑❑ Using the Smart Hub service145 Using the Samsung Apps by categoryThe following categories are available: What’s New?: Displays newly registered applications videos Game: Displays various games such as sudoku and chess Sports: Displays various sports media such as match information, images and short length video management tools and social networking such as Facebook and Twitter 147 [Legal Statement]membership fees that are sold separately. Please visit http://www.samsung The services and availability of content through Smart Hub are subject to change from time to time without prior notice 148 SkypeSkype created a little piece of software that And if both of you are on Skype, it’s free Communicate with people around the world 150 scrolled may cause corrupted charactersActiveX is not supported Some options cannot be accessed in Tab mode. (To access such options switch to Pointer mode.) Some text may appear corrupted because the number of supported fonts is limited The response to a command on the remote or the screen display may be delayed temporarily if a web page is currently loading 12.The loading of a web page may delay or stop with some web pages 13.Copy and Paste are not supported 151 15.The number of bookmarks and logs that can be saved is limited17.The web browsing speed depends on the network conditions may not commence playback after PIP interruption and a possible refresh for the page may be required 19.The Web Browser can play MP3 audio files only 152 When you import or export the bookmark, the folder tree is not includedbe saved in “Samsung SmartTV Bookmark” folder If the time is not set in the menu (System → Time → Clock), the history information may not be saved from the list according to oldest page accessed the video/audio codec supported 153 ❑❑ Troubleshooting for SMART HUB156 ❑❑ About AllShare™158 ❑❑ Setting Up AllShare™159 ■■ MediaMedia NN The Media function is available in all devices which support DLNA DMC Allowed / Denied: Allows/Blocks the the devices Delete: Deletes the devices from the list device is turned on or tries to connect to the TV, it may appear on the list again 160 Using the Media FunctionIf the media function executes for the first time, the warning popup window appears. Press the ENTEREbutton to select Allow, then you can use Media function on that device 163 on your TV and the Digital Audio Input on the Home Theatrespeakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV 165 Anynet+ Menu166 ❑❑ Setting Up Anynet+167 ❑❑ Switching between Anynet+ Devices168 ❑❑ Listening through a Receiver169 ❑❑ Troubleshooting for Anynet+172 ❑❑ Using the Smart Hub173 ❑❑ Connecting a USB Device174 ❑❑ Connecting to the PC through network175 Photos, MusicNN DivX DRM, Multi-audio,embedded captions are not supported 178 file damage or data lossConnect a USB HDD to the dedicated USB 1 (HDD) port Do not disconnect the USB device while it is loading The higher the resolution of the image, the longer it takes to display on the The maximum supported JPEG resolution is 15360X8640 pixels is displayed folder 180 If the TV has been no input during time set in Auto Protection Time, theScreensaver will run The power-savingmode of some external hard disk drives may be released automatically when connected to the TV files on the device may not be read If a USB device connected to the TV is not recognized, the list of files on the the PC, format the device and check the connection 182 Recorded TV188 current recording process will be closedWhen recording is performed by both the PVR (Personal Video Recorder) PVR function takes precedence to the display settings of the TV If you change the input source during recording, the screen will go blank until the change is completed 190 ●● If a USB device dedicated to recording is connected, existing Timeshift orcontinue but the �(REC) button will be disabled Off timer 193 ●● Supported Subtitle Formats194 ●● Supported Video Formats199 ■■ MusicPlaying Music 1. Press the l/ r/ u/ dbutton to select the desired music file in the file list 2. Press the ENTEREbutton or �(Play) ●● During playing the music, you can search NN Only displays the files with MP3 extension 203 ■■ PhotosViewing a Photo (or Slide Show) 1.Press the l/r/u/dbutton to select the desired file in the file list 2.Press the ENTEREbutton ◀ immediately ●● All files in the file list section will be displayed in the slide show Background Music NN The Background Music cannot be changed until the BGM has finished loading 204 ❑❑ Media Contents - Additional Function206 Videos / Music / Photos Play Option menu210 ❑❑ Troubleshooting223 ❑❑ Teletext Feature227 Typical Teletext page228 ❑❑ Licence
211 pages 0 b
211 pages 0 b
211 pages 0 b
3 ❑❑ Using the Channel Menu4 ■■ Schedule ManagerOO SMART HUB → Schedule Manager → ENTERE You can view, modify or delete a channel you have reserved to watch Using the Timer Viewing Set the current time first to use this function 1. Press the ENTEREbutton to add programme to schedule manually. The Timer Viewing screen appears 9 ❑❑ Using the Channel10 Select AllDeselect All 13 ❑❑ Using the Favourite Channels15 ❑❑ Memorising Channels17 NN Channel mode●● C (aerial channel mode) / S (cable channel mode): These two modes allow 18 ❑❑ Other Features19 ❑❑ Changing the Preset Picture Mode20 ❑❑ Adjusting Picture Settings21 ❑❑ Changing the Picture Size25 ❑❑ Changing the Picture Options26 screen depthDynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast Shadow Detail (-2~+2):Increase the brightness of dark images Gamma: Adjust the primary colour intensity Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern Pattern window disappears 32 ■■ Picture OptionsOO MENUm→ Picture → Picture Options → ENTERE NN When connecting a PC, you can only make changes to the Colour Tone ●● Colour Tone (Cool / Standard / Warm1 / Warm2) NN Warm1 or Warm2 will be deactivated when the picture mode is Dynamic 34 NN Available in AV, COMPONENT (480i / 1080i) and HDMI (1080i)Motion Plus 36 ❑❑ Setting up the TV with Your PC37 ■■ PC Screen AdjustmentOO MENUm→ Picture → Screen Adjustment → PC Screen Adjustment → ENTERE that it is aligned to the centre of screen Position: Adjust the PC screen position with direction button (u/ d/ l/ r) Image Reset: Resets the image to default settings 38 Using Your TV as a Computer (PC) DisplaySetting Up Your PC Software (Based on Windows XP) 1.Click on “Control Panel” on the Windows start menu 2.Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-boxwill appear 3.Click on “Display” and a display dialog box will appear 4.Navigate to the “Settings” tab on the display dialog-box ●● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels] 39 ❑❑ Changing the Preset Sound Mode40 ❑❑ Adjusting Sound Settings42 ■■ SPDIF OutputAudio Format: You can select the Digital Audio output (SPDIF) format the input source AV receiver (0ms ~ 250ms) 45 ❑❑ Selecting the Sound Mode t46 ❑❑ Setting the Network49 If you have a Dynamic Network, you should use an ADSL modem or routerthat supports Dynamic Host Configuration Protocol (DHCP). Modems and have to enter them manually. Most home networks are Dynamic Networks Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS connection. To get the IP address, subnet mask, gateway, and DNS values you can also get these values through your computer IP addresses 51 ■■ Network Setup (Auto)Network Setup How to set up automatically ◀2. Select the Wired 3.The network test screen appears, and network setting is done 52 NN If it fails to set automatically, check the connection of LAN port54 How to set up manually3. Set IP Mode 4. Press the button on your remote to go to the IP Address 56 ■■ Connecting to a Wireless Network for LED 6000 and 6400 SeriesSold Separately 59 If Pure High-throughput(Greenfield) 802.11n mode is selected and theFi certification specifications If your wireless router supports WPS (Wi-FiProtected Setup), you can in either mode If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN adapter.” Ensure the TV is turned on before you connect the Samsung Wireless LAN adapter 61 ■■ Connecting to a Wireless Network for LED 6600 Series and above62 To use a wireless network, your TV must be connected to a wireless IP sharer(either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network nearby, this will result in interference and communication failure If you apply a security system other than the systems listed below, it will not work with the TV 63 Adapter65 ◀How to set up automatically2.Select the Wireless(general) 71 ■■ Network Setup (WPS(PBC))How to set up using WPS(PBC) If your router has a PBC (WPS) button, follow these steps: Go to Network Settings screen. To enter it follow the directions of Network Settings Select the WPS(PBC) 3. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network 4. The network connection screen appears and network setting is done 73 How to set up using One Foot ConnectionTurn on the power of wireless router and TV 2. Select the One Foot Connection 3. Place the wireless router in parallel with the Samsung Wireless LAN adapter giving a gap no larger than 25cm NN If One Foot Connection dose not connect your TV to your Router, a pop 75 ■■ Network Setting (Plug & Access)NN You can check for equipment that supports Plug & Access on www.samsung. com 80 When finished searching a mobile device, set the81 If Your TV Fails to Connect to the Internet82 ❑❑ Setting the Time84 Setting the On / Off TimerOMENUm→ System → Time → ENTERE On Timer : Three different on timer settings can be made. You must set the clock first ◀you can set up the day you want to activate the timer N The cmark indicates the day is selected Time: Set the hour and minute 89 ❑❑ Locking Programme90 Confirm New PIN→2 → 4 → POWER (on) 91 ❑❑ Economical Solutions92 Min Backlight: When Eco sensor is On, the minimum screen brightness canbe adjusted manually NN If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity No-SignalPower Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal NN Disabled when the PC is in power saving mode of being left idle to prevent overheating 93 ■■ Menu LanguageSet the menu language Select Menu Language and press the ENTEREbutton Choose desired language and press the ENTEREbutton ◀ ■■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours) the screen 94 ■■ GeneralGame Mode ●● Precautions and limitations for game mode To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu If you display the TV menu in Game Mode, the screen shakes slightly ●● Game Mode is not available when the input source is set to TV or PC 95 ●● If Game Mode is On:–– Picture mode is set to Standard and Sound mode is set to Movie ray and Home Theatre products which support BD Wise. When BD Wise is NN Available when connecting Samsung products that support BD Wise through a HDMI cable Boot Logo (Off / On): Display Samsung logo when the TV is turned on TV Name: Sets the TV name so you can find it easily on a mobile device Keyboard) 97 ❑❑ Picture In Picture (PIP)100 ❑❑ Support Menu101 service centre◀ ■■ Software Upgrade Software Upgrade can be performed via a broadcasting signal or by network connection or downloading the latest firmware from “www.samsung.com,” to a USB memory device Current Version the software already installed in the TV NN Software is represented as ‘Year/Month/ Day_Version’ 104 ●● Alternative Software (backup): Not Available■■ Contact Samsung View this information when your TV does not work properly or when you want to 105 ❑❑ Using the 3D function106 ❑❑ Viewing TV using the 3D function108 ●● 3D Mode: Select the 3D input formatNN When watching 3D images, turn on 3D Active Glasses 114 Supported formats and operating specifications for Standard HDMI 3D116 3D Active Glasses from Samsung’s previous product (IR type) or othermanufacturers not be supported is optimized The 3D Active Glasses may not work properly if there is any other 3D Active Glasses 118 ❑❑ Getting Started with Smart Hub120 Screen Display123 Account Login124 1.Press the Red button in the Smart Hub home page2.Select ^by pressing the u/ d/ l/ rbutton. The account list appears Create Account 3.Select the desired Smart TV ID, and the press the ENTEREbutton 129 ●● You can delete the entered character using the PRE-CHbuttonNN If you want to register service later, select Connect Later 131 ❑Setting up Smart Hub132 Service ManagerTicker Autorun: You can set Ticker Autorun to come on when powering on the NN The Ticker application provides useful News, Weather, and Stock Market this feature not be supported Channel Bound Service (Off / On): Some channels support applications as an NN Only available if supported by the broadcaster 135 ❑❑ Using the Samsung Apps137 Using the Samsung Apps by categoryThe following categories are available: What’s New?: Displays newly registered applications videos Game: Displays various games such as sudoku and chess Sports: Displays various sports media such as match information, images and short length video management tools and social networking such as Facebook and Twitter 139 [Legal Statement]membership fees that are sold separately Please visit http://www.samsung.com for more information on specific device information and content availability. The services and availability of content through Smart Hub are subject to change from time to time without prior notice 140 ■■ Skype142 scrolled may cause corrupted charactersActiveX is not supported Some options cannot be accessed in Tab mode. (To access such options switch to Pointer mode.) Some text may appear corrupted because the number of supported fonts is limited The response to a command on the remote or the screen display may be delayed temporarily if a web page is currently loading 12.The loading of a web page may delay or stop with some web pages 13.Copy and Paste are not supported 143 15.The number of bookmarks and logs that can be saved is limited17.The web browsing speed depends on the network conditions may not commence playback after PIP interruption and a possible refresh for the page may be required 19.The Web Browser can play MP3 audio files only 144 When you import or export the bookmark, the folder tree is not includedbe saved in “Samsung SmartTV Bookmark” folder If the time is not set in the menu (System → Time → Clock), the history information may not be saved from the list according to oldest page accessed the video/audio codec supported 145 ❑❑ Troubleshooting for SMART HUB148 ❑❑ About AllShare™150 ❑❑ Setting Up AllShare™151 ■■ MediaMedia NN The Media function is available in all devices which support DLNA DMC Allowed / Denied: Allows/Blocks the the devices Delete: Deletes the devices from the list device is turned on or tries to connect to the TV, it may appear on the list again 152 Using the Media FunctionIf the media function executes for the first time, the warning popup window appears. Press the ENTEREbutton to select Allow, then you can use Media function on that device 155 on your TV and the Digital Audio Input on the Home Theatrethat supports the ARC function speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV 157 Anynet+ Menu158 ❑❑ Setting Up Anynet+159 ❑❑ Switching between Anynet+ Devices160 ❑❑ Listening through a Receiver161 ❑❑ Troubleshooting for Anynet+164 ❑❑ Using the Smart Hub165 ❑❑ Connecting a USB Device166 ❑❑ Connecting to the PC through network167 NN DivX DRM, Multi-audio,embedded captions are not supported170 file damage or data lossConnect a USB HDD to the dedicated USB 1 (HDD) port Do not disconnect the USB device while it is loading The higher the resolution of the image, the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels is displayed folder 172 If the TV has been no input during time set in Auto Protection Time, theScreensaver will run The power-savingmode of some external hard disk drives may be released automatically when connected to the TV files on the device may not be read If a USB device connected to the TV is not recognized, the list of files on the the PC, format the device and check the connection the Recycle Bin” function on the PC to permanently delete the file 174 ■■ VideosPlaying Video 1.Press the l/r/u/dbutton to select the desired file in the file list 2.Press the ENTEREbutton or ∂(Play) button its playing time If video time information is unknown, play time and progress bar are not displayed 175 ●● Supported Subtitle Formats176 ●● Supported Video Formats181 ■■ MusicPlaying Music 1.Press the l/ r/ u/ dbutton to select the desired music file in the file list ●● During playing the music, you can search ◀ using the �(FF) and µ(REW) button 185 ■■ PhotosViewing a Photo (or Slide Show) 1.Press the l/ r/ u/ dbutton to select the desired file in the file list 2.Press the ENTEREbutton ◀ immediately ●● All files in the file list section will be displayed in the slide show Background Music NN The BGM Mode cannot be changed until the BGM has finished loading 186 ❑❑ Smart Hub - Additional Function188 Videos / Music / Photos Play Option menu191 NN Pressing the INFO button while a device name is selected will displayinformation about the selected device name the selected file 192 ❑❑ Troubleshooting203 ❑❑ Anti-theftKensington Lock205 ❑❑ Analogue Channel Teletext Feature209 Typical Teletext page210 ❑❑ Licence
Also you can find more Samsung manuals or manuals for other TV and Video.