Samsung UA40D6000SMSHD, UA40D6600WMSHD, UA40D6600WNXHC manual Switching between Anynet+ Devices

Models: UA40D6600WNXZN UA46D6600WMXHC UA40D6000SMXHC UA46D6600WMXSQ UA46D6400UMXSQ UA40D6000SMSHD UA55D6600WMXHC UA40D6600WNXUM UA40D6600WMSHD UA40D6400UMSHD UA46D6400UMXHC UA46D6400UMSHD UA40D6400UMXHC UA46D6000SMXHC UA46D6600WMSHD UA40D6600WNXHC UA40D6600WMXHC UA40D6000SMXSQ UA46D6000SMSHD

1 229

Page 167

1.Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTERE button to select Device List.

NN If you cannot find a device you want, select Refresh to refresh the list.

2.Select a device and press the ENTERE button. You can switch to the selected device.

NN The Device List menu will only appear when you set Anynet+ (HDMI-CEC)
◀	to On in the System menu.	▶
◀		▶
●●	Switching to the selected device may take up to 2 minutes. You cannot
	cancel the operation during the switching operation.
●●	If you have selected external input mode by pressing the SOURCE button,
	you cannot use the Anynet+ function. Make sure to switch to an Anynet+
	device by using the Device List.

Image 167