How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1.Follow Steps 1 through 2 in the “How to set up automatically” procedure.
2.Select the IP Settings on network test screen.
3.Set IP Mode to Manual.
4.Press the d button on your remote to go to the IP Address.
| IP Settings |
IP Mode | Manual |
IP Address | 0 . 0 . 0 . 0 |
Subnet Mask | 0 . 0 . 0 . 0 |
Gateway | 0 . 0 . 0 . 0 |
◀ 5. Enter the IP Address, Subnet Mask, Gateway, | DNS Mode | Manual | ▶ |
|
| ||
and DNS Server values. Use the number | DNS Server | 0 . 0 . 0 . 0 |
|
|
|
| |
buttons on your remote to enter numbers and |
| OK |
|
|
|
| |
the arrow buttons to move from one entry field to | ● The displayed image may differ depending on |
| |
another. | the model. |
|
|
|
|
|
6.When done, select the OK.
7.The network test screen appears, and network setting is done.