How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. | Follow Steps 1 through 2 in the “How to set |
| up automatically” procedure. |
2. | Select the IP Settings on network test |
| screen. |
3. | Set IP Mode to Manual. |
| IP Settings |
IP Mode | Manual |
IP Address | 0 . 0 . 0 . 0 |
Subnet Mask | 0 . 0 . 0 . 0 |
Gateway | 0 . 0 . 0 . 0 |
DNS Mode | Manual |
DNS Server | 0 . 0 . 0 . 0 |
| OK |
◀ | Press the d button on your remote to go to |
4. | |
| the first entry field. |
● The displayed image may differ depending on the model.
▶
5.Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another.
6.When done, select the OK.
7.The network connection screen appears, and network setting is done.
