Samsung UA40D6600WNXZN, UA40D6600WMSHD, UA40D6600WNXHC, UA40D6600WNXUM, UA55D6600WMXHC manual English

	I want to start Anynet+.	•• Check if the Anynet+ device is properly connected to the TV and
		check if the Anynet+ (HDMI-CEC)is set to On in the Anynet+
		Setup menu.
		•• Press the TOOLS button to display the Anynet+ menu and select a
		menu you want.
	I want to exit Anynet+.	•• Select View TV in the Anynet+ menu.
		•• Press the SOURCE button on the TV remote control and select a
		non- Anynet+ device.
	The message “Connecting to	•• You cannot use the remote control when you are configuring
	Anynet+ device...” appears on	Anynet+ or switching to a view mode.
◀	the screen.	•• Use the remote control when the Anynet+ setting or switching to	▶
		view mode is complete.
	The Anynet+ device does not	•• You cannot use the play function when Plug & Play (initial setup) is
	play.	in progress.

English