Samsung UE40D5000PW on, Problem, compatible, and on again, Possible Solution, Anynet+ does not work, (initial setup), etc.), Check whether the remote control is Anynet+

UA32D4000NWCSH, UA32D4000NWSAB, UA32D4000NWXSH, UA32D5000PWXSH, UA40D5000PWCSH, UA40D5000PWXSH, UA46D5000PWSAB, UE19D4000NWXBT, UE19D4000NWXRU, UE19D4000NWXXC, UE19D4000NWXXH, UE19D4000NWXXN, UE19D4000NWXZF, UE19D4000NWXZG, UE19D4000NWXZT, UE19D4005NWXXE, UE19D4010NWXBT, UE19D4010NWXRU, UE19D4010NWXXC, UE19D4010NWXXH, UE19D4010NWXXN, UE19D4010NWXZF, UE19D4010NWXZG, UE19D4010NWXZT, UE19D4015NWXXE, UE19D4020NWXRU, UE19D4020NWXXC, UE22D5000NHXRU, UE22D5000NHXXC, UE22D5000NWXBT, UE22D5000NWXRU, UE22D5000NWXXC, UE22D5000NWXXH, UE22D5000NWXXN, UE22D5000NWXZF, UE22D5000NWXZG, UE22D5000NWXZT, UE22D5005NWXXE, UE22D5010NWXBT, UE22D5010NWXRU, UE22D5010NWXXC, UE22D5010NWXXH, UE22D5010NWXXN, UE22D5010NWXZF, UE22D5010NWXZG, UE22D5010NWXZT, UE22D5015NWXXE, UE22D5020NWXRU, UE22D5020NWXXC, UE22D5020NWXZT, UE26D4004BWXXE, UE27D5000NHXRU, UE27D5000NHXXC, UE27D5000NWXBT, UE27D5000NWXMS, UE27D5000NWXRU, UE27D5000NWXXC, UE27D5000NWXXH, UE27D5000NWXXN, UE27D5000NWXZF, UE27D5000NWXZG, UE27D5000NWXZT, UE27D5005NWXXE, UE27D5010NWXBT, UE27D5010NWXRU, UE27D5010NWXXC, UE27D5010NWXXN, UE27D5010NWXZF, UE27D5010NWXZG, UE27D5010NWXZT, UE27D5015NWXXE, UE27D5020NWXRU, UE27D5020NWXXC, UE32D4000NWXBT, UE32D4000NWXMS, UE32D4000NWXRU, UE32D4000NWXTK, UE32D4000NWXXC, UE32D4000NWXXH, UE32D4000NWXXN, UE32D4000NWXZF, UE32D4000NWXZG, UE32D4000NWXZT, UE32D4005NWXXE, UE32D4010NWXBT, UE32D4010NWXRU, UE32D4010NWXXC, UE32D4010NWXXH, UE32D4010NWXXN, UE32D4010NWXZF, UE32D4010NWXZG, UE32D4010NWXZT, UE32D4015NWXXE, UE32D4020NWXBT, UE32D4020NWXRU, UE32D4020NWXXC, UE32D4020NWXXH, UE32D4020NWXZT, UE32D5000PWXBT, UE32D5000PWXMS, UE32D5000PWXRU, UE32D5000PWXXC, UE32D5000PWXXH, UE32D5000PWXXN, UE32D5000PWXZF, UE32D5000PWXZG, UE32D5000PWXZT, UE32D5005PWXXE, UE32D5727RKXXE, UE32D5800VWXBT, UE32D5800VWXRU, UE32D5800VWXXC, UE32D5800VWXXH, UE32D5800VWXZT, UE37D5000PWXBT, UE37D5000PWXMS, UE37D5000PWXRU, UE37D5000PWXXC, UE37D5000PWXXH, UE37D5000PWXXN, UE37D5000PWXZF, UE37D5000PWXZG, UE37D5000PWXZT, UE37D5005PWXXE, UE40D5000PWXBT, UE40D5000PWXMS, UE40D5000PWXRU, UE40D5000PWXTK, UE40D5000PWXXC, UE40D5000PWXXH, UE40D5000PWXXN, UE40D5000PWXZF, UE40D5000PWXZG, UE40D5000PWXZT, UE40D5005PWXXE, UE40D5707RKXXE, UE40D5800VWXBT, UE40D5800VWXRU, UE40D5800VWXXC, UE40D5800VWXXH, UE40D5800VWXZT, UE46D5000PWXBT, UE46D5000PWXMS, UE46D5000PWXRU, UE46D5000PWXXC, UE46D5000PWXXH, UE46D5000PWXXN, UE46D5000PWXZF, UE46D5000PWXZG, UE46D5000PWXZT, UE46D5005PWXXE, UE46D5707RKXXE

	Problem		Possible Solution

	Anynet+ does not work.	●●	Check whether the TV remote control is in TV mode.
		●●	Check whether the remote control is Anynet+
			compatible.
		●●	Anynet+ does not work in certain situations. (Searching
			channels, operating My Downloads or Plug & Play
			(initial setup), etc.)
◀		●●	When connecting or removing the HDMI cable, please	▶
			make sure to search devices again or turn your TV off
			and on again.
		●●	Check if the Anynet+ Function of Anynet+ device is set
			on.

English

Models

1imagine the possibilities
3❑❑ Using the INFO button (Now & Next guide)
4❑❑ Using Channel menu (Watch TV)
19❑❑ Retuning Channels
- ■■ Antenna (Air / Cable) t
- 20■■ Country
- 21Auto Tuning
- 24■■ Manual Tuning
- 26■■ Edit Channel Number (Disable / Enable)
- 27■■ Fine Tune
- NN NN
- 28■■ Transfer Channel List
29❑❑ Changing the Preset Picture Mode
- ■■ Picture Mode
30❑❑ Adjusting Picture Settings
- Samsung MagicAngle
- 31■■ Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
- 32■■ Screen Adjustment
  - 334:3: Sets the picture to basic (4:3) mode
  - Smart View1
  - Smart View2
  - ◀NN NOTE
  - :Reduces original screen by 50%
  - :Reduces original screen by 25%
  - ●● Smart View1 is enabled only in HDMI mode
  - ●● Smart View2 is enabled only in DTV and HDMI modes
  - 354:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when
  - country requires different picture size
  - 36●● PC Screen Adjustment
  - NN It is available in PC mode
  - that it is aligned to the centre of screen
  - Position: Adjust the PC’s screen positioning if it does not fit the TV screen
  - Press the ▲ or ▼ button to adjust the Vertical-Position.Press the ◄ or ►
  - button to adjust the Horizontal-Position
  - Image Reset: Resets the image to default settings
- 37■■ Auto Adjustment t
39❑❑ Changing the Picture Options
- ■■ Advanced Settings
- 42■■ Picture Options
- 45■■ Reset Picture (OK / Cancel)
46❑❑ Changing the Preset Sound Mode
- ■■ Sound Mode t
47❑❑ Sound Systems, Etc
- ■■ Sound Effect
- 49■■ Broadcast Audio Options
- 51■■ Additional Settings
  - 52sound, reducing interference going to speakers and various digital devices
  - such as a DVD player
  - Audio Format: You can select the Digital Audio output(SPDIF) format. The
  - source
  - interactive 3D sound experience
  - Audio Delay: Correct audio-videosync problems, when watching TV or
  - as an AV receiver (0ms ~ 250ms)
  - 53Dolby Digital Comp (Line / RF): This function minimizes signal disparity
  - ATV Sound)
  - NN Select Line to obtain dynamic sound, and RF to reduce the difference
  - between loud and soft sounds at night time
  - either -20dBor -31dB
  - either -10dBor -20dB
- 54■■ Speaker Settings
- 56■■ Reset Sound (OK / Cancel)
57❑❑ Selecting the Sound Mode
58Setting the Network
- Network Settings
- Network Status
- AllShare Settings
59❑❑ Connecting to a Wired Network
- 62If you have a Dynamic Network, you should use an ADSL modem or router
- that supports Dynamic Host Configuration Protocol (DHCP). Modems and
- have to enter them manually. Most home networks are Dynamic Networks
- values manually on your TV’s Cable Setup Screen when you set up the
- computer, you can also get these values through your computer
- Static IP addresses
- NN A network speed of lower than 10 Mbps is not supported
- 63■■ Network Setup (Auto)
  - 64If it fails to set automatically, check the connection of LAN port
- 65■■ Network Setup (Manual)
68❑❑ Connecting to a Wireless Network for LED 5 series 32-46inches
- 70To use a wireless network, your TV must be connected to a wireless IP
- sharer (either a router or a modem). If the wireless IP sharer supports
- DHCP, your TV can use a DHCP or static IP address to connect to the
- wireless network
- If the channel set for the wireless IP sharer is currently being used by
- failure
- not work with the TV
- 73Notice
- 75Network Setup (Auto)
- 80■■ Network Setup (WPS(PBC))
- 81Network Setup (One Foot Connection)
  - 82Select the One Foot Connection
  - Place the wireless router in parallel
  - with the Samsung Wireless LAN
  - Adapter giving a gap no larger
  - than 25cm
  - 4. Wait until the connection is
  - automatically established
  - 5.The network connection screen
  - appears, and network setting is done
  - 6.Place the wireless router in a desired location
- 83■■ Network Setup (Ad-Hoc)
  - 84Input the generated
  - into the device you want to connect
  - Network Name (SSID)
  - Security key
  - 85If Your TV Fails to Connect to the Internet
  - unauthorized access. As your TV has a different MAC address, your ISP can not
  - authenticate its MAC address, and your TV can not connect
  - other than a PC (such as your TV) to the Internet
  - your ID or password when connecting to the Internet
  - your Internet service provider
  - your Internet service provider, please contact Samsung Electronics
86❑❑ Setting the Time
- Time
88❑❑ Using the Sleep Timer
89❑❑ Setting the On / Off Timer
- 92NN The cmark indicates the day
- ◀ you’ve selected
- Off Time: Set the hour and minute
93❑❑ Locking Programme
- ■■ Security
  - 94Program Rating Lock
95Picture In Picture (PIP)
- PIP t
97❑❑ Economical Solutions
- ■■ Eco Solution
99Other Features
110❑❑ Support Menu
- ■■ e-Manual
- 111■■ Self Diagnosis
- 113■■ Software Upgrade
  - 116NN If the software was changed, existing software is displayed
- 117■■ Contact Samsung
- ■■ Contents Home
118❑❑ Using the My Downloads
119❑❑ Connecting a USB Device
- 120NN It might not work properly with unlicenced multimedia files
- NN Need-to-KnowList before using My Downloads
- My Downloads
- 122be played. Digital Rights Management (DRM) is a technology that supports
- managing billings and settlements
- If more than 2 PTP devices are connected, you can only use one at a time
- If more than two MSC devices are connected, some of them may not be
- may not be supported
- 123Auto Protection Time
- 124If a USB extension cable is used, the USB device may not be recognized or
- the files on the device may not be read
- the PC, format the device and check the connection
- “Empty the Recycle Bin” function on the PC to permanently delete the file
- My Downloads only supports sequential jpeg format
- The scene search and thumbnail functions are not supported in the Videos
- If the number of files and folders saved on a USB storage device is
- approximately over 4000, the files and folders may not appear and some
- folders may not be opened
- 125❑❑ Connecting to the PC through network for LED 5 series 32-46inches
- 126◀NN NN
128❑❑ Screen Display
- 129■■ Videos
  - 131●● Supported Video Formats
  - 135Other Restrictions
  - content or the container
  - Sound or video may not work if the contents have a standard bit rate
  - frame rate above the compatible Frame/sec listed in the table above
  - video may not be played smoothly
  - The menu can be displayed late if the video is over 10Mbps(bit rate)
  - Video content can not be played, if there are many contents in one file
- 137■■ Music
  - 138Playing the selected music
  - 1.Press the C (Edit Mode) button
  - 2.Select the desired music
  - NN The check box appears to the left of the selected files
  - 3.Press the TOOLS button and select Play Selected Contents
  - NN You can select or deselect all music pressing the Select All / Deselect
  - All
- 139■■ Photos
140❑❑ My Downloads - Additional Functions
- 145What is Anynet+? t
- 146the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e
- Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV
- You can connect only one Home Theatre
- You can connect an Anynet+ device using the HDMI cable. Some HDMI
- cables may not support Anynet+ functions
- Anynet+ works when the AV device supporting Anynet+ is in the standby or
- on status
- to 3 devices of the same type
- 147Anynet+ Menu
- 148Shows the play menu of the connected device. E.g. If a DVD
- appear
- Shows the title menu of the connected device. E.g. If a DVD
- Menu
- Receiver
- Sound is played through the receiver
149Setting Up Anynet+
- Anynet+ (HDMI-CEC)
150❑❑ Switching between Anynet+ Devices
151❑❑ Listening through a Receiver
153❑❑ Troubleshooting for Anynet+
- 154Check whether the TV remote control is in TV mode
- Check whether the remote control is Anynet+
- compatible
- channels, operating My Downloads or Plug & Play
- (initial setup), etc.)
- and on again
- on
- 158The TV sound is not
- output through the
- receiver
159❑ About AllShare™
160❑❑ Setting Up AllShare™
- ■■ AllShare Settings
- 161■■ Media
  - 162Using the Media Function
163❑❑ Analogue Channel Teletext Feature
167❑❑ Anti-theftKensington Lock
169❑❑ Connections Common Interface Slot
- 171●● You must obtain a “CI or CI+ CARD” from a local cable service provider
- ●● When removing the “CI or CI+ CARD”, carefully pull it out with your hands
- since dropping the “CI or CI+ CARD” may cause damage to it
- ●● Insert the “CI or CI+ CARD” in the direction marked on the card
- the model
- your authorized dealer
- ●● If you have any problems, please contact a service provider
- screen will be distorted or will not be seen
172❑❑ Troubleshooting
- 178The speakers
- are making an
- is not connected to an audio input
- inappropriate noise
- For antenna or cable connections, check the signal
- strength. Low signal level may cause sound distortion
- No Picture, No Video
- The TV will not turn
- ◀ on
- the wall outlet and the TV
- 179The TV turns off
- Ensure the Sleep Timer is set to Off in the Time menu
- automatically
- settings
- the TV will turn off after 10 ~ 15 minutes if there is no
- signal
- 184Others
- The picture will not
- HD channels will have black bars on either side of the
- display in full screen
- screen when displaying up scaled SD (4:3) contents
- Black bars on the top and bottom will appear during
- movies that have aspect ratios different from your TV
- TV to full screen
- The remote control
- does not work
- in the right direction
- away
189❑❑ Licence
- 190DivX Certified to play DivX video up to HD 1080p, including premium content
- more about DivX VOD. Pat. 7,295,673;7,460,688; 7,519,274
- 191Open Source Licence Notice

Models

Contents