Samsung UE40D8000YS ❑❑ Locking Programme

UA46D7000LWSAB, UA46D7000LWXSH, UA55D7000LNXHC, UA55D7000LNXSH, UA55D7000LNXSQ, UA55D7000LNXTW, UA55D7000LNXUM, UA55D7000LNXZN, UA55D7000LWXSH, UE40D7000LQXZT, UE40D7000LSXRU, UE40D7000LSXXC, UE40D7000LSXXH, UE40D7000LSXXN, UE40D7000LSXZF, UE40D7005LUXXE, UE40D7080LSXZG, UE40D7090LSXZG, UE40D8000YQXZT, UE40D8000YSXRU, UE40D8000YSXXC, UE40D8000YSXXH, UE40D8000YSXXN, UE40D8000YSXZF, UE40D8000YUXXU, UE40D8005YUXXE, UE40D8080YSXZG, UE40D8090YSXZG, UE46D7000LQXZT, UE46D7000LSXBY, UE46D7000LSXCA, UE46D7000LSXRU, UE46D7000LSXTK, UE46D7000LSXXC, UE46D7000LSXXH, UE46D7000LSXXN, UE46D7000LSXZF, UE46D7000LUXXU, UE46D7005LUXXE, UE46D7080LSXZG, UE46D7090LSXZG, UE46D8000YQXZT, UE46D8000YSXBY, UE46D8000YSXRU, UE46D8000YSXTK, UE46D8000YSXXC, UE46D8000YSXXH, UE46D8000YSXXN, UE46D8000YSXZF, UE46D8000YUXXU, UE46D8005YUXXE, UE46D8080YSXZG, UE46D8090YSXZG, UE55D7000LQXZT, UE55D7000LSXRU, UE55D7000LSXTK, UE55D7000LSXXC, UE55D7000LSXXH, UE55D7000LSXXN, UE55D7000LSXZF, UE55D7005LUXXE, UE55D7080LSXZG, UE55D7090LSXZG, UE55D8000YQXZT, UE55D8000YSXBY, UE55D8000YSXCA, UE55D8000YSXRU, UE55D8000YSXTK, UE55D8000YSXXC, UE55D8000YSXXH, UE55D8000YSXXN, UE55D8000YSXZF, UE55D8005YUXXE, UE55D8080YSXZG, UE55D8090YSXZG, UE60D8000YQXZT, UE60D8000YSXRU, UE60D8000YSXXC, UE60D8000YSXXH, UE60D8000YSXXN, UE60D8000YSXZF, UE60D8005YUXXE, UE60D8090YSXZG

❑❑ Locking Programme

OO MENUm→ System → Security → ENTERE

■■ Security

NN The PIN input screen appears before the setup screen.

NN Enter your 4-digit PIN. Change the PIN using the Change PIN option.

◀

▶

English

Models

3❑❑ Using the INFO button (Now & Next guide)
4❑❑ Using the Channel Menu
9Detailed Information
●● Cancel Schedules: Cancel a show you have reserved to watch
●● Edit: Change a show you have reserved to watch
13NN Using the operation buttons with the Channel List
Programme View
Channel View
●● kPage: Move to next or previous page
14❑❑ Using the Channel
174.Highlight a group on the Favourites list, and then press ENTERE
Select OK, press ENTERE, and then press ENTEREagain
Press ENTEREagain to exit Edit Mode
a group using the up and down arrows on your remote
23Channel Status Display Icons
24❑❑ Using Favourites Channels
251.On the Channel screen, select a channel and press the TOOLS button
2. Add or delete a channel in the favourite
groups you want among 1, 2, 3, 4 and
NN One or more groups can be selected
NN The cmark appears to the left of the selected files
26❑❑ Memorizing Channels
34NN Channel mode
●● C (aerial channel mode) / S (cable channel mode): These two modes allow
35Transponder: Selects the transponder using the up/down buttons
Scan Mode (All Channels / Free Channels Only): Selects either free or all
channels to store
Network Search (Disable / Enable): Enable / Disable network search using
the up/down buttons
Signal Quality: Display the current status of broadcasting signal
on the broadcasting conditions
36■■ Genre Selection for U.K
Genre Selection is available when Antenna is set to Freesat
Genre Selection
■■ Satellite System
Satellite Selection: You can choose the satellites for this TV
LNB Power (Off / On): Enables or disables the power supply for the LNB
39–– My Longitude: Sets the longitude for my location
–– My Latitude: Sets the latitude for my location
–– Satellite Longitude Settings: Sets the longitude of user defined satellites
43❑❑ Other Features
45■■ Fine Tune
(analogue channels only)
automatically during the search and store operation. If the signal is weak or
clear
NN Settings are applied to the channel you’re currently watching
the right-handside of the channel number in the channel banner
NN To reset the fine-tuning,select Reset
46❑❑ Changing the Preset Picture Mode
47❑❑ Adjusting Picture Settings
48❑❑ Changing the Picture Size
49–– Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size
–– 4:3: The default setting for a movie or normal broadcasting
50NN Smart View 2 is enabled only in HDMI or DTV mode
54●● HD (High Definition): 16:9 - 1080i / 1080p (1920 x 1080), 720p (1280 x 720)
55NN Not available in PC, Component or HDMI mode
56❑❑ Changing the Picture Options
57screen depth
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast
Shadow Detail (-2~+2) for LED TV : Increase the brightness of dark images
Gamma: Adjust the primary colour intensity
Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern
menu disappears or a menu other than the Picture menu is opened, the
calibration is saved and the Expert Pattern window disappears
NN While the Expert Pattern is running, sound is not outputted
NN Only enabled on DTV, Component / HDMI models
NN Disabled for channels that support MHEG if Digital Text is enabled
60●● Flesh Tone: Emphasize pink “Flesh Tone”
●● Edge Enhancement (Off / On): Emphasize object boundaries
Motion Lighting
,Brightness or Contrast, Motion Lighting will be set to Off
62■■ Picture Options
OO MENUm→ Picture → Picture Options → ENTERE
NN When connecting a PC, you can only make changes to the Colour Tone
●● Colour Tone (Cool / Standard / Warm1 / Warm2)
NN Warm1 or Warm2 will be deactivated when the picture mode is Dynamic
65●● Motion Plus (Off / Clear / Standard / Smooth / Custom / Demo)
NN If noise occurs on the screen, please set up the Motion Plus to Off. If
Motion Plus is Custom, you can set up the Blur Reduction, Judder
Reduction or Reset manually
NN If Motion Plus is Demo, you can compare the difference of on and off
modes
68❑❑ Setting up the TV with Your PC
69■■ PC Screen Adjustment
OO MENUm→ Picture → Screen Adjustment → PC Screen Adjustment →
that it is aligned to the centre of screen
Position: Adjust the PC screen position with direction button (u/ d/ l/ r)
Image Reset: Resets the image to default settings
70Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
1.Click on “Control Panel” on the Windows start menu
2.Click on “Appearance and Themes” in the “Control Panel” window and a display
dialog-boxwill appear
3.Click on “Display” and a display dialog box will appear
72❑❑ Changing the Preset Sound Mode
73❑❑ Adjusting Sound Settings
74●● SRS TruDialog (Off / On)
NN If Speaker Select is set to External Speaker, SRS TruDialog is disabled
SRS CS Headphone
78●● Audio Format
Audio Format
80■■ Additional Setting
DTV Audio Level (MPEG / HE-AAC):This function allows you to reduce the
TV broadcast) to a desired level
NN According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dBand 0dB
NN To increase or decrease the volume, adjust between the range 0 and
respectively
81as a DVD player
Audio Format: You can select the Digital Audio output (SPDIF) format
the input source
AV receiver (0ms~250ms)
86❑❑ Selecting the Sound Mode t
88❑❑ Connecting to a Wired Network
91If you have a Dynamic Network, you should use an ADSL modem or router
that supports Dynamic Host Configuration Protocol (DHCP). Modems and
have to enter them manually. Most home networks are Dynamic Networks
Some networks require a Static IP address. If your network requires a Static
IP address, you must enter the IP address, subnet mask, gateway, and DNS
connection. To get the IP address, subnet mask, gateway, and DNS values
you can also get these values through your computer
IP addresses
92❑❑ Setting the Network
94■■ Network Setup (Auto)
How to set up automatically
◀2. Select the Wired
3.The network test screen appears, and network setting is done
95NN If it fails to set automatically, check the connection of LAN port
99❑❑ Connecting to a Wireless Network
100To use a wireless network, your TV must be connected to a wireless IP sharer
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV
can use a DHCP or static IP address to connect to the wireless network
nearby, this will result in interference and communication failure
1042.Select the Wireless (general)
The
4. In the list of networks, press the uor d
button to select a network, and then press the ENTEREbutton
NN If the wireless router is set to Hidden (Invisible), you have to select Add
Network and enter the correct Network Name (SSID) and Security key to
establish the connection
105If the
Security
Next
on your remote to select number/ characters
110■■ Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
2.Select the WPS(PBC)
Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it needs and connects to your network
117If Your TV Fails to Connect to the Internet
118❑❑ Setting the Time
122Setting the On / Off Timer
OMENUm→ System → Time → ENTERE
On Timer
: Three different on timer settings can be made. You must set the clock first
◀you can set up the day you want to activate the timer
N The cmark indicates the day is selected
124●● When there is only one photo file in the USB, the Slide Show will not play
●● If a folder name is too long, the folder cannot be selected
127❑❑ Locking Programme
128NN Available only when the Source is set to TV
Program Rating Lock
NN The items of Program Rating Lock differs depending on the country
129●● Change PIN: Change your personal ID number required to set up the TV
131❑❑ Economical Solutions
136mode
NN This function is not available in the Screen Fit mode
Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen
screen
Scrolling: This function removes after-imageson the screen by moving all
the pixels on the PDP according to a pattern. Use this function when there
are remaining after images or symbols on the screen, especially when you
displayed a still image on the screen for a long time
138OO MENUm→ System → ENTERE
■■ Language
●● Menu Language: Set the menu language
●● Teletext Language: Set a desired language for teletext
the broadcast
139■■ Subtitle
Use this menu to set the Subtitle mode
Subtitle (Off / On): Switches subtitles on or off
Mode (Normal / Hearing Impaired): Sets the subtitle mode
Subtitle Language: Sets the subtitle language
function, Normal automatically activates even if the Hearing Impaired
mode is selected
140■■ Digital Text (Disable / Enable) for U.K
If the programme broadcasts with digital text, this feature is enabled
(Interactive TV), EC (Electronic Commerce)
144: You can
too bright for you
NN Set the Light Effect to Off to reduce the power consumption
NN The colour of light may vary depending on the model
Boot Logo (Off / On): Display Samsung logo when the TV is turned on
TV Name: Sets the TV name so you can find it easily on a mobile device
Keyboard)
146■■ DivX® Video On Demand
NN For more information on DivX® VOD, visit “http://vod.divx.com”
148■■ Common Interface
CI Menu
Application Info
1.Purchase a CI CAM module at your nearest dealer or by phone
4.Check if you can see a picture on a scrambled signal channel
149❑❑ Picture In Picture (PIP)
150●● PIP settings
152❑❑ Support
153■■ Self Diagnosis
OO MENUm→ Support → Self Diagnosis → ENTERE
Self Diagnosis
Picture Test (Yes / No): Use to check for picture problems
Yes: If the test pattern does not appear or there is noise in the test pattern
select Yes. There may be a problem with the TV. Contact Samsung’s Call
Centre for assistance
with your external equipment. Please check your connections. If the problem
persists, refer to the external device’s user manual
154Sound Test
Yes: If you can hear sound only from one speaker or not at all during the
sound test, select Yes. There may be a problem with the TV. Contact
Samsung’s Call Centre for assistance
No: If you can hear sound from the speakers, select No. There may be a
problem with your external equipment. Please check your connections. If
the problem persists, refer to the external device’s user manual
157Installing the Latest Version
By USB: Insert a USB drive containing the
firmware upgrade file, downloaded from
“www.samsung.com,” into the TV. Please
be careful not to disconnect the power or
remove the USB drive until upgrades are
complete. The TV will be turned off and on
automatically after completing the firmware
so that you can easily reset them after the upgrade
158By Online: Upgrade the software using the Internet
Setup, refer to the “Network Connection” instructions
broken. Please retry downloading. If the problem persists, download by
USB and upgrade
By Channel: Upgrade the software using the broadcasting signal
will be automatically searched and downloaded
NN The time required to download the software is determined by the signal
status
159NN If the software was changed, existing software is displayed
161❑❑ Using the 3D function
162❑❑ Viewing TV using the 3D function
164●● 3D Mode: Select the 3D input format
NN When watching 3D images, turn on 3D Active Glasses
1763D Active Glasses from Samsung’s previous product (IR type) or other
manufacturers not be supported
is optimized
The 3D Active Glasses may not work properly if there is any other 3D
Active Glasses
177●● Some files are not supported in the 2D to 3D function
178❑❑ Getting Started with SMART HUB
179The Gateway to all content integrated in one place
Control your entertainment life with easy and simple user friendly UI
Access to diverse Apps that are adding up every day
Customize your TV, by App grouping & sorting to your taste
180Screen Display
183Account Login
For an application with multiple accounts, select
^to access the different accounts
1841.Press the Red button in the SMART HUB home page
2.Select ^by pressing the u/ d/ l/ rbutton. The account list appears
Create Account
3.Select the desired Smart TV ID, and the press the ENTEREbutton
186Using the Keypad
Pressing the /on the remote while you are using the Screen Keypad enables
and icons
Using the Green bbutton on the remote control to change the input mode. (T9
ABC)
You can use this Screen Keypad in a several SMART HUB applications
Here is how to input characters using keypad of ABC type
For example, suppose that you want to input “105Chang”
188●● You can delete the entered character using the PRE-CH button
190❑Setting up SMART HUB
193❑❑ Using the SMART HUB service
195Using the Samsung Apps by category
The following categories are available:
What’s New?: Displays newly registered applications
videos
Game: Displays various games such as sudoku and chess
Sports: Displays various sports media such as match information, images and
short length video
management tools and social networking such as Facebook and Twitter
199●● Back: Moves to the previous web page
NN If there is no saved next web page, this icon will not work
200Refresh
Stop
Home: Goes to the URL you specified as your the home page
Zoom: You can select a zoom level of 50%, 75%, 100%, 125%, 150%, 200%
400% and Fit to Screen
Bookmarks: Displays the Bookmarks List screen. You can set the current page
–– Import bookmarks: Imports the bookmark list from USB device. You should
connect a USB storage to use this function
History: Displays the History screen. You can select a web page to visit in the
then press ENTERE
201When you highlight a page, the Options button appears on the right. Access the
Options by selectng the Options button, and then pressing ENTERE. In the
Delete All
pages from the History list, or Add to Bookmark the selected page to Bookmark
list
URL: Shows the URL of the current page. If you press the ENTEREbutton, the
URL pop-upappears. Press ENTEREagain and you can key in a new a URL
directly. You can also select a page to visit on the displayed Page list
the Sort Criteria button in the upper right corner of the URL pop-upand then
press ENTERE
202Windows List
NN A new web browser tab automatically displays the home page
Search: Lets you search the web. When you access the Search entry field and
press ENTERE, the Browser displays a pop-upwith a text entry keyboard and a
keypad
On the left of the pop up is the name of the current search engine. Select the
or add a search engine to the current list
Settings: You can configure the Web Browser settings
210■■ Skype
211[Legal Statement]
Due to the various capabilities of products featuring the Samsung SMART
HUB - Content Service, as well as limitations in the available content, certain
territories
The services and availability of content through SMART HUB are subject to
change from time to time without prior notice
214❑❑ About AllShare™
216❑❑ Setting Up AllShare™
217■■ Media
Media
NN The Media function is available in all devices which support DLNA DMC
Allowed / Denied: Allows/Blocks the the devices
Delete: Deletes the devices from the list
device is turned on or tries to connect to the TV, it may appear on the list
again
218Using the Media Function
If the media function executes for the first time, the warning popup window
appears. Press the ENTEREbutton to select Allow, then you can use Media
function on that device
222❑❑ Anynet+
223on your TV and the Digital Audio Input on the Home Theatre
The ARC function enables digital output of sound using the HDMI IN 2(ARC)
that supports the ARC function
speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e
Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV
225Anynet+ Menu
227❑❑ Setting Up Anynet+
229❑❑ Switching between Anynet+ Devices
231❑❑ Listening through a Receiver
233Using the ARC function
NN To use the ARC function, a receiver which supports the HDMI-CECand ARC
features must be connected to the HDMI IN 2 (ARC) port
the ARC signal continuously, the receiver will be blocked from receiving the
signal
234❑❑ Using the Media Contents
235❑❑ Connecting a USB Device
236❑❑ Connecting to the PC through network
240Media Contents only supports USB Mass Storage Class (MSC) devices
are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port
file damage or data loss
Connect a USB HDD to the dedicated USB 1 (HDD) port
Do not disconnect the USB device while it is loading
The higher the resolution of the image, the longer it takes to display on the
241The maximum supported JPEG resolution is 15360X8640 pixels
is displayed
folder
If the number of files and folders saved on a USB storage device is
approximately over 8000, the files and folders may not appear and some
folders may not be opened
MP3 files with DRM that have been downloaded from a non-freesite cannot
be played. Digital Rights Management (DRM) is a technology that supports
managing billings and settlements
242●● If more than 2 PTP devices are connected, you can only use one at a time
243If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run
The power-savingmode of some external hard disk drives may be released
automatically when connected to the TV
files on the device may not be read
If a USB device connected to the TV is not recognized, the list of files on the
the PC, format the device and check the connection
If a file deleted from the PC is still found when SMART HUB is run, use the
“Empty the Recycle Bin” function on the PC to permanently delete the file
245❑❑ Recorded TV
256❑❑ Videos
258●● Supported Subtitle Formats
259●● Supported Video Formats
267❑❑ Music
273❑❑ Photos
275❑❑ Media Contents - Additional Function
277Videos / Music / Photos Play Option menu
The following functions are enabled during playback
281NN Pressing the INFO button while a device name is selected will display
information about the selected device name
INFO
283Using Data Service
NN Provided Data Service information may vary depending on broadcast
1. Press the , for Italy
or red button. Select a desired service by pressing the u
d/ l/ rand OKEbuttons
NN If Auto Run Data Service is On, the data service will automatically run with
loading banner. In this case, the , for Italy
or red button does not work
2842.Press the red button. The data service screen will be displayed
4.If you press EXIT button, data service will be closed
285Main Data Service buttons and their functions
287HbbTV
HbbTV is turned off by default. To use HbbTV, go to System → Data Service
and set it On
being played back
An application on HbbTV may malfunction temporarily depending on the
circumstances of the broadcast station or application provider
An application is only available for use on HbbTV when the TV network is
connected to an external network. The application may malfunction depending
on the network conditions
289❑❑ Troubleshooting
291scrolled may cause corrupted characters
ActiveX is not supported
Some options cannot be accessed in Tab mode. (To access such options
switch to Pointer mode.)
Some text may appear corrupted because the number of supported fonts is
limited
The response to a command on the remote or the screen display may be
delayed temporarily if a web page is currently loading
12.The loading of a web page may delay or stop with some operating systems
292Copy and Paste are not supported
the size or colours.) may not be supported
The number of bookmarks and logs that can be saved is limited
The maximum number of windows that can open at the same time may vary
depending on the browsing condition or TV model
The web browsing speed depends on the network conditions
may not commence playback after PIP interruption and a possible refresh for
the page may be required
295■■ Troubleshooting for Anynet+
316NN You can keep your TV as optimum condition to upgrade the latest firmware on
web site (samsung.com → Support → Downloads) by USB
317❑❑ Connecting to a COMMON INTERFACE slot
3182.Connect the CI CARD Adapter into the COMMON INTERFACE port on the product
3.Insert the “CI or CI+ CARD”
319■■ Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted
The pairing information containing a telephone number
the “CI or CI+ CARD” ID the Host ID and other
information will be displayed in about 2~3 minutes. If
an error message is displayed, please contact your service provider
When the configuration of channel information has finished, the message
“Updating Completed” is displayed, indicating the channel list is updated
322❑❑ Teletext Feature
326Typical Teletext page
327❑❑ Anti-theftKensington Lock
329❑❑ Licence
332❑❑ How to view the e-Manual
334Using the Help
Display the e-ManualGuide & the Product Guide by pressing Help
335How to toggle between the e-Manualand the corresponding menu(s)
336Viewing the Contents
337Using the Zoom mode
Zoom
dbuttons
NN To return to the previous screen, press the RETURN button

❑❑ Locking Programme

Models

Contents