Before Using the Recording and Timeshift Functions
"" This function is only available on certain models in specific geographical areas.
Before using the recording and schedule recording functions●● To set up a Schedule Recording, you must first set the TV's clock. Set the Clock ((MENU/123)
●● You can set up a maximum total of 30 Schedule Viewing and Schedule Recording entries.
●● Recordings are
●● A USB hard drive with a speed of 5,400 rpm or above is recommended. However,
●● USB memory sticks are not supported.
●● The total recording capacity may differ with the amount of available hard drive space and the recording quality level.
●● Schedule Recording requires at least 100MB of free space on the USB storage device. Recording will stop if the available storage space falls below 50MB while recording is in progress.
●● If the available storage space falls below 500MB while both the Schedule Recording and Timeshift functions are in progress, only the recording will stop.
●● The maximum recording time is 720 minutes. ●● A video is played according to the TV settings.
●● If the input signal is changed while recording is in progress, the screen will go blank until the change is made. In this case, recording will resume, but
●● When using the Record or Schedule Recording function, the actual recording may start a second or two later than the specified time.