1. Manuals
  2. Brands
  3. TV and Video
  4. DVD Recorder
  5. Samsung
  6. TV and Video
  7. DVD Recorder

Samsung 01304A, 20070205090323359, AK68-01304A, V6700-XAC Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 176
Download on canonical page 176 pages, 13.76 Mb
ENG-20
C
ONNECTIONS
Connection to an Audio System (Dolby digital, MPEG2 or DTSAmplifier)
1
Using a coaxial cable (not included), connect the
DIGITALAUDIO OUT (COAXIAL) terminal on
the rear of the DVD-VCR to the DIGITALAUDIO
IN (COAXIAL) terminal of the Amplifier.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
-Please set the audio in the menu screen according to the Amplifier.(See pages 59 to 60)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
2
Using the video signal cable(s), connect the
S-VIDEO or COMPONENT OUT terminals on the
rear of the DVD-VCR to the S-VIDEO or
COMPONENT IN terminal of your TV as
described on pages 15 to 18.
Dolby digital or
DTS Amp.
Coaxial Cable
(not included)
01304A_V6700_XAC_Eng1 1/18/07 11:58 AM Page 20
MENU

Models

Contents