Assembling the cleaner
Name of each part
[ Charger (Station) ]
cleanerthe
Charging Lamp
Charge Pin
Power
Lamp
Remote Control
Holder
Vents
Catching Sill
A 02ssembling
[ VIRTUAL GUARD ]
Mode Lamp
Distance Detection
Sensor
Mode/Power Button
Main Body Detection Sensor
■Installing the batteries
Batteries are not supplied with the product. You have to purchase the batteries separately. Install the alkaline batteries (type D) before use.
1
Lift the cover of the VIRTUAL GUARD while pressing the locking tab.
2
Install the batteries into the VIRTUAL GUARD as shown by the figure below. (If the batteries are installed with the incorrect polarity, the VIRTUAL GUARD will not work.)
3
After inserting the tip of the cover into the slot, push the other end to close it until it clicks into place.
✽Specification: Alkaline Type D (LR20) batteries
Assembling the cleaner _17