PictBridge menu
Setting the date/time imprint option
Touch the Menu (
To print using the DPOF setting
If the printer is compatible with DPOF, you can use the DPOF setting. page 91
•If the printer is not recognised, or to print again after direct printing with a PictBridge printer, remove the USB cable, select “PictBridge” in the menu again, then reconnect the cable.
•If the “USB Connect” menu is set to “Mass Storage”, you cannot connect a Pictbridge compatible printer to the camcorder through USB cable. By touching the “Switch Mode” “Pictbridge” on the screen, at this point, you can connect the easy printing mode. In some instances, the DVD camcorder may not connect to the printer, this will depend on the make of the printer. If connection fails, disconnect the USB cable and turn off the printer and back on. Then, connect the USB cable and set the DVD camcorder to “Pictbridge”.
•The date/time option may not be supported by all printers. Check with your printer manufacturer. The “Date/Time” menu cannot be set up if the printer does not support this option.
•PictBridge™ is a registered trademark of CIPA (Camera & Imaging Products Association), an image transfer standard developed by Canon, Fuji, HP, Olympus, Seiko Epson, and Sony.
•Use the USB cable provided with the DVD camcorder.
•Use the AC power adaptor for your DVD camcorder during PictBridge direct printing. Turning your DVD camcorder off during printing might damage data on the storage media.
•Movie images are not available for printing.
•You can set various printing options depending on the printer. Please refer to the user manual of the printer for details.
•Do not remove USB cable or memory card during printing.
•You may not print photo images recorded on other devices.
1 | Date/Time | ► |
1 / 1
Date/Time
12 Date
1 / 1 | Time |
2007/01/01 12:00
<Printed photo with date/time imprinted>
English _93