1. Manuals
  2. Brands
  3. Household Appliance
  4. Vacuum Cleaner
  5. Samsung
  6. Household Appliance
  7. Vacuum Cleaner

Samsung VR10M701PU5 VR10M701PU5/WA, VR10M703PW9/WA 2-4 Safety information

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 184
Download on canonical page 184 pages, 83.45 Mb

2-4Safety information

CAUTION

Before use

•Insert the dustbin before using POWERbot.

•Be careful with the followings for proper automatic recharging.

––Always turn on the power of the docking station.

––Install the docking station where POWERbot can easily find.

––Do not leave any object in front of the docking station.

•When installing the docking station, do not leave the cord carelessly on the floor since POWERbot may get tangled by it.

•Do not use POWERbot on black colored floors.

––The POWERbot may not be able to operate normally.

•Do not place any objects within 0.5 m to both sides and 1 m to the front of the docking station.

•Make sure the docking station's charging contact is not damaged or have any foreign matters on it.

•Do not install the docking station in an area with a dark floor.

––If the floor around the docking station is dark, recharging is hindered.

•Move any obstacles that may disturb POWERbot's movement (such as children's indoor swing or slides) before cleaning.

•Do not use the POWERbot in a place which is narrower than the turning radius (0.5 m or less) of the POWERbot.

•If a brush or brush cover is not assembled correctly, scratches may occur on the floor, or product malfunction may occur.

•Before operating the POWERbot, remove the objects which could break such as

a frame, mirror, and porcelain items so that the POWERbot works without interruption.

In use

•Using POWERbot on thick carpet may damage both POWERbot and the carpet. ––The POWERbot cannot pass over carpet

that is thicker than 1 cm.

•Do not use POWERbot on tables or other high surfaces.

––There is a risk of damage if it falls.

•The POWERbot may bump into chair, desk legs therefore move them away for faster and efficient cleaning.

•When POWERbot is operating, do not lift it up or carry it to another area.

•Do not hold by driving wheels of POWERbot when carrying it to another area.

•Do not put any objects on top of POWERbot and camera since it may cause malfunction.

•Remove any large papers or plastic bags immediately when using POWERbot since they may block the intake.

•Do not aim the red pointer directly at people or animals.

•Do not lie down around the POWERBOT that is running.

––Your hair may be caught in the brush, resulting in physical injury.

Cleaning and maintenance

•Prevent any damage to POWERbot by complying with the following

––Do not clean POWERbot by spraying water directly onto it or use benzene, thinner, acetone or alcohol to clean it.

•Do not disassemble or repair POWERbot. This should only be done by a certified repairman.

•Always keep the obstacle sensor, cliff sensor and camera clean.

––If foreign matter accumulates, sensors may malfunction.

English-6

VR7000_Q_guide_13ge_00780C-02.indb 6

2017-12-04 오전 10:17:56

MENU

Models

Contents