Samsung WA10B3 (pump drained washer), CLEANING THE FILTER NET, HOW TO CLEAN THE FILTER, WATER SUPPLY CONNECTOR FILTER, WARNING IN MOVING WASHING MACHINE

WATER SUPPLY CONNECTOR FILTER

1.Pull out the filter and wash well.

inlet water valve

2.Pull in the filter and connect the hose to the inlet water valve tightly.

3.Check if there is a leakage. Note to tighten up the connector.

CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.

1.Push the upper part of the filter and pull in.

2. Open the cover as	3. Clean the filter.	4. Close the cover and insert the
shown in the figure.		lower part of the filter in the
		basket first and then push the
		filter with "click" sound .

1. Push up and	2. Remove the collected	3. Clean the filter.	4. Pull down the filter net.
pull out the filter net.	lint from the filter net.

HOW TO CLEAN THE FILTER

1. Place a rag under the washer filter not to wet the floor.	(pump drained washer)
2. Rotate the filter counterclockwise	1.Place a rag under washer filter not to wet the floor.
and pull out the filter.	2.Turn the filter-cap to the left.
3. Remove dirts and rotate	3.Take the filter out and
the filter clockwise	remove dirts.
until it locks in position.	4. Reassemble in
	reverse order.

WARNING IN MOVING WASHING MACHINE

When carrying washing machine,

please make sure two people move by grabbing handles on both sides. If you carry it with its front part on your back or on your knee, it might warp the shape or cause some damage.

9