Samsung WA10R3 MANUAL FUNCTIONS, INSTALLATION & MAINTENANCE

MANUAL FUNCTIONS

Each washing course changes manually.

Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Hold button

Blanket course includes SOAK Function basically.

WASH+ FUNCTION

(If you want to add more wash-time, use to this wash+ function) Press the POWER button.

Select the course(Press the course button).

➜BLANKET, ECO+, SPEEDY, WOOL

	Press the FUNCTION button once.
once	Press the START/HOLD button once.
	Water level is selected automatically.
	Washing,rinsing, and spinning follow.

SOAK & WASH+ FUNCTION

Press the POWER button.

Select the course(Press the course button).

➜BLANKET, ECO+, SPEEDY, WOOL Press the FUNCTION button twice.

	Press the START/HOLD button once.
twice	Water level is selected automatically.
	Soaking, Washing, rinsing, and spinning follow.

SOAK FUNCTION

Press the POWER button.

Select the course(Press the course button).

➜BLANKET, ECO+, SPEEDY, WOOL Press the FUNCTION button three times.

	Press the START/HOLD button once.
three times	Water level is selected automatically.
	Soaking, Washing, rinsing, and spinning follow.
	WASH ONLY
	Press the POWER button.
	Press the FUNCTION SELECT button four times.
	Press the START/HOLD button once.
	When the FUNCTION button is pressed during washing, the wash
four times	time can be changed to between 3 and 25 minutes in duration.
	RINSE ONLY
	Press the FUNCTION button five times.
	Press the START/HOLD button once.
	When the FUNCTION button is pressed during rinsing, the rinse
	times can be changed to between 1 to 5 times in duration.
five times
	SPIN ONLY
	Press the FUNCTION button six times.
	Press the START/HOLD button once.
	When the FUNCTION button is pressed during spinning, the spin
	time can be changed to from 1 to 7 minutes.
six times
	WASH AND RINSE
	Press the FUNCTION button seven times.
	Press the START/HOLD button once.
	When the FUNCTION button is pressed during working, the rinse
	times can be changed to between 1 to 5 times in duration.
seven times
	RINSE AND SPIN
	Press the FUNCTION button eight times.
	Press the START/HOLD button once.
	Rinsing and spin drying follow.
	When the FUNCTION button is pressed during working, the rinse
eight times
	times can be changed to between 1 and 5 times in duration.

INSTALLATION & MAINTENANCE

The User’s Manual is for common use.

Make use of the User’s Manual depending upon your washing machine model.

■ENVIRONMENT Leave some space

Maintain at least 10cm between the washer and the wall.

Place the washer on a sturdy flat surface.

If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1°)

Adjust the legs for even placement.

Never install the washer near water.

Do not place the washer in steamy rooms or where the washer is directly exposed to rain. Moisture may destroy the electrical insulation causing an electrical shock hazard.

Avoid direct sunlight or heaters.

As plastic an electrical components are affected by direct heat, never place the washer near furnaces, boilers, etc. Do not place under direct sunlight.

■LEVELLING

•If the washer is not leveled with the ground, it makes the machine tremble more or be out of order. So, make sure that the washer is leveled properly.

SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING THE POSITION OF THE WASHING TUB.

•Open the lid of the machine, pour water into the tub up to the level just below the pulsator, and adjust the legs so that the pulsator is positioned at the center of the water as shown in the figure.

•Place the machine more than 10cm away from the wall.

•Adjust the legs on feet

- 9 -