Troubleshooting
Troubleshooting
Problem |
| Action | |
|
| ||
| • Make sure the drain hose is straightened all the way to the | ||
|
| drain system. If you encounter a drain restriction, call for | |
|
| service. | |
| • Make sure the debris filter is not clogged. | ||
| • Close the door and press or tap Start/Pause. For your safety, | ||
|
| the washing machine will not tumble or spin unless the door is | |
Does not drain and/ |
| closed. | |
or spin. | • | Make sure the drain hose is not frozen or clogged. | |
| • Make sure the drain hose is connected to a drain system that is | ||
|
| not clogged. | |
| • If the washing machine is not supplied with sufficient power, | ||
|
| the washing machine temporarily will not drain or spin. | |
|
| As soon as the washing machine regains sufficient power, it will | |
|
| operate normally. | |
|
| ||
| • Press or tap Start/Pause to stop the washing machine. | ||
| • It may take a few moments for the door lock mechanism to | ||
|
| disengage. | |
| • The door will not open until 3 minutes after the washing | ||
The door does not |
| machine has stopped or the power turned off. | |
open. | • | Make sure all the water in the drum is drained. | |
| • The door may not open if water remains in the drum. Drain the | ||
|
| drum and open the door manually. | |
| • Make sure the door lock light is off. The door lock light turns off | ||
|
| after the washing machine has drained. | |
|
| ||
| • Make sure the Auto Detergent and Auto Softener settings are | ||
|
| properly configured. | |
| • Make sure you use the recommended types of detergent as | ||
Excessive suds. |
| appropriate. | |
• | Use high efficiency (HE) detergent to prevent oversudsing. | ||
| |||
| • Reduce the detergent amount for soft water, small loads, or | ||
|
| lightly soiled loads. | |
| • | ||
|
| ||
| • Make sure the remaining amount of detergent and fabric | ||
Cannot apply |
| softener is not over the limit. | |
• | Make sure the Auto Dispense function is activated, with both | ||
additional detergent. | |||
| the Water Hardness and Concentration settings properly | ||
|
| ||
|
| specified (applicable models only). | |
|
|
| |
40 English
|
| 2017/2/22 11:10:14 | |
|
| ||
|
|
|
|